Panasonic AJ-HDX900 Benutzerhandbuch
15
2
AUTO KNEE function
When shooting with the level set to people or scenes against a high-
brightness background, the background will be whitened out, and the
buildings and scene in the background will be blurred. If the AUTO
KNEE function is activated at times like this, the background will be
reproduced clearly. This function is effective for shooting in the following
situations:
When shooting with the level set to people or scenes against a high-
brightness background, the background will be whitened out, and the
buildings and scene in the background will be blurred. If the AUTO
KNEE function is activated at times like this, the background will be
reproduced clearly. This function is effective for shooting in the following
situations:
≥
When shooting people in the shade under a clear sky
≥
When simultaneously shooting people in a car or indoors and the
outside scenery through a window
outside scenery through a window
≥
When shooting scenes with a strong contrast
6
OUTPUT/AUTO KNEE selector switch
This switch selects the video signals which are to be
output from the camera unit to the VTR unit, viewfinder
and/or video monitor.
CAM. AUTO KNEE ON:
This switch selects the video signals which are to be
output from the camera unit to the VTR unit, viewfinder
and/or video monitor.
CAM. AUTO KNEE ON:
The images shot by the camera are output.
The AUTO KNEE circuit operates.
The AUTO KNEE circuit operates.
CAM. AUTO KNEE OFF:
The images shot by the camera are output.
The MANUAL KNEE circuit operates.
The MANUAL KNEE circuit operates.
BARS:
Color bar signals are output.
The AUTO KNEE circuit does not operate.
The AUTO KNEE circuit does not operate.
7
WHITE BAL (white balance memory selector) switch
This is used to select the method used to adjust the white
balance.
This is used to select the method used to adjust the white
balance.
PRST:
Set the switch to this position at times when, for
instance, there is no time to adjust the white balance.
The factory setting for the white balance is 3200K, but
this can be changed to any other value by a menu
setting. For details, refer to “4-9-4 Setting the color
temperature manually.”
instance, there is no time to adjust the white balance.
The factory setting for the white balance is 3200K, but
this can be changed to any other value by a menu
setting. For details, refer to “4-9-4 Setting the color
temperature manually.”
A or B:
When the AUTO W/B BAL switch 2 is set to AWB, the
white balance is automatically adjusted, and the
adjusted value is stored in memory A or memory B.
For details, refer to “4-2-1 Ajusting the white balance.”
white balance is automatically adjusted, and the
adjusted value is stored in memory A or memory B.
For details, refer to “4-2-1 Ajusting the white balance.”
8
MODE CHECK button
Each time this button is pressed, one of the four screen
pages (STATUS screen display, !LED screen display,
FUNCTION screen display and AUDIO screen display) is
selected and displayed on the viewfinder to indicate the
camera’s settings.
This does not affect the output signals of the camera.
Each time this button is pressed, one of the four screen
pages (STATUS screen display, !LED screen display,
FUNCTION screen display and AUDIO screen display) is
selected and displayed on the viewfinder to indicate the
camera’s settings.
This does not affect the output signals of the camera.
9
MARKER SELECT button
This is used to select the marker information displays on
the viewfinder screen. Each time it is pressed, the two
marker information display screens set by the menu are
switched in the following sequence: A (A marker display)
5 B (B marker display) 5 OFF (no marker display) 5 A,
and so on repeatedly. Note that when the power is
switched ON, the display on the viewfinder screen
immediately before the power was switched OFF will
appear.
For details, refer to “4-7-8 Marker check screen displays.”
This is used to select the marker information displays on
the viewfinder screen. Each time it is pressed, the two
marker information display screens set by the menu are
switched in the following sequence: A (A marker display)
5 B (B marker display) 5 OFF (no marker display) 5 A,
and so on repeatedly. Note that when the power is
switched ON, the display on the viewfinder screen
immediately before the power was switched OFF will
appear.
For details, refer to “4-7-8 Marker check screen displays.”
:
USER MAIN, USER 1 and USER 2 buttons
A user setting can be allocated to each of these buttons
using the setting menu. When a button is pressed, the
user setting mode allocated to it is selected.
When the button is pressed again, the selected mode is
released.
For details, refer to “4-8-4 Allocating functions to the
USER MAIN, USER1 and USER2 buttons.”
A user setting can be allocated to each of these buttons
using the setting menu. When a button is pressed, the
user setting mode allocated to it is selected.
When the button is pressed again, the selected mode is
released.
For details, refer to “4-8-4 Allocating functions to the
USER MAIN, USER1 and USER2 buttons.”
Shooting and recording (VTR unit)
;
REC START button
When this is pressed, recording starts; when it is pressed
again, recording stops. This button functions in the same
way as the lens VTR button.
When this is pressed, recording starts; when it is pressed
again, recording stops. This button functions in the same
way as the lens VTR button.
<
VTR SAVE/STBY (tape protection) switch
This is used to select the power supply mode when the
VTR has temporarily stopped recording (REC PAUSE
mode).
SAVE : This is the tape protection mode. The cylinder is
This is used to select the power supply mode when the
VTR has temporarily stopped recording (REC PAUSE
mode).
SAVE : This is the tape protection mode. The cylinder is
stopped in the half-loading status.
Less power is consumed than at the STBY
position, and the operating time provided by the
battery is prolonged.
When the switch is set to this position, the SAVE
lamp inside the viewfinder lights.
Less power is consumed than at the STBY
position, and the operating time provided by the
battery is prolonged.
When the switch is set to this position, the SAVE
lamp inside the viewfinder lights.
STBY : When the REC START button ; is pressed,
recording on tape will start immediately.
<Notes>
O
This unit employs the PRE RECORDING function as a
standard configuration.
Images will be recorded immediately after pressing the
REC START button when this switch is set to either
SAVE or STBY.
However, when the switch is set to SAVE position, the
length of time for operating the tape travel mechanism
after stopping the recording by pressing the REC
START button is slightly longer than when the switch is
set to STBY position.
standard configuration.
Images will be recorded immediately after pressing the
REC START button when this switch is set to either
SAVE or STBY.
However, when the switch is set to SAVE position, the
length of time for operating the tape travel mechanism
after stopping the recording by pressing the REC
START button is slightly longer than when the switch is
set to STBY position.
O
When the prescribed amount of time has elapsed in the
STBY mode, the unit is automatically set to the SAVE
mode. To return the unit to the STBY mode, set the
VTR SAVE/STBY switch to SAVE, and then again to
the STBY position.
STBY mode, the unit is automatically set to the SAVE
mode. To return the unit to the STBY mode, set the
VTR SAVE/STBY switch to SAVE, and then again to
the STBY position.
Chapter 2 Parts and their functions
(continued)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ15