Panasonic AJ-HDX900 Benutzerhandbuch
16
=
VIDEO OUT OUTPUT SEL (output signal selection)
switch
This is used to select the signals output from the VIDEO
OUT connector.
VTR : In the recording or other EE mode, the camera
switch
This is used to select the signals output from the VIDEO
OUT connector.
VTR : In the recording or other EE mode, the camera
images are output from the connectors; in the
playback mode, it is the VTR’s playback signals
which are output.
playback mode, it is the VTR’s playback signals
which are output.
CAM : The camera images are output at all times.
Furthermore, the audio output signals are synchronized
with the video signals as well.
For details on the video output, refer to “4-8-1 Settings of
signals output from VIDEO OUT connector.”
Furthermore, the audio output signals are synchronized
with the video signals as well.
For details on the video output, refer to “4-8-1 Settings of
signals output from VIDEO OUT connector.”
>
VIDEO OUT CHARACTER switch
This is used to control the superimposing of the
characters onto the images which are output from the
VIDEO OUT connector.
ON
This is used to control the superimposing of the
characters onto the images which are output from the
VIDEO OUT connector.
ON
: The characters are superimposed onto the images.
OFF : The characters are not superimposed onto the
images.
For details on the character types, refer to “4-8-1 Settings
of signals output from VIDEO OUT connector.”
of signals output from VIDEO OUT connector.”
?
VIDEO OUT (signal switching) switch
This switch switches the modes of output signals from the
VIDEO OUT connector.
HD SDI: To output HD SDI signals
SD SDI: To output the down-converted SD SDI signals
VBS:
This switch switches the modes of output signals from the
VIDEO OUT connector.
HD SDI: To output HD SDI signals
SD SDI: To output the down-converted SD SDI signals
VBS:
To output the down-converted composite video
signals
signals
@
VIDEO OUT connector
This is an output connector for video signals. Video
signals linked to the setting of the VIDEO OUT switch (=,
>
This is an output connector for video signals. Video
signals linked to the setting of the VIDEO OUT switch (=,
>
, ?) are output from here.
A
REMOTE (remote control) connector
The AJ-RC10G remote control unit (optional accessory) is
connected here.
The AJ-RC10G remote control unit (optional accessory) is
connected here.
B
MON OUT (Monitor) connector
This is the connector for outputting the video signal which
is used for monitoring.
HD SDI signals or analog HD Y signals are output from
here.
Whether characters are to be superimposed onto the
images output from the VIDEO OUT connector can be
selected separately using the internal menu.
For details, refer to “4-8-2 Settings for signals output from
the MON OUT connector.”
This is the connector for outputting the video signal which
is used for monitoring.
HD SDI signals or analog HD Y signals are output from
here.
Whether characters are to be superimposed onto the
images output from the VIDEO OUT connector can be
selected separately using the internal menu.
For details, refer to “4-8-2 Settings for signals output from
the MON OUT connector.”
C
GENLOCK IN connector
The HD Y reference signal is supplied to this connector
when the camera unit is to be gen-locked or the time code
is to be externally locked.
Composite video signals may be input as the reference
signal instead but, in this case, the H phase cannot be
adjusted. Also, it is not possible to externally lock the sub
carrier of the unit’s down-converter output (composite
video signal).
The HD Y reference signal is supplied to this connector
when the camera unit is to be gen-locked or the time code
is to be externally locked.
Composite video signals may be input as the reference
signal instead but, in this case, the H phase cannot be
adjusted. Also, it is not possible to externally lock the sub
carrier of the unit’s down-converter output (composite
video signal).
O
Returned video images can be confirmed in the
viewfinder screen by entering HD-Y signals.
viewfinder screen by entering HD-Y signals.
D
EJECT button
This is pressed to insert or eject the cassette.
This is pressed to insert or eject the cassette.
E
STOP button
This is pressed to stop the tape travel.
This is pressed to stop the tape travel.
F
PLAY/PAUSE button
This is pressed to view the playback picture on the
viewfinder screen or using a color video monitor. The
button’s lamp comes on during playback.
When it is pressed during playback, the unit is set to
pause in the playback mode (PLAY PAUSE), and the
button’s lamp flashes. If the unit is left in the pause mode
for two minutes, it automatically changes to the stop
(STOP) mode.
This is pressed to view the playback picture on the
viewfinder screen or using a color video monitor. The
button’s lamp comes on during playback.
When it is pressed during playback, the unit is set to
pause in the playback mode (PLAY PAUSE), and the
button’s lamp flashes. If the unit is left in the pause mode
for two minutes, it automatically changes to the stop
(STOP) mode.
G
REW (rewind) button and lamp
When this button is pressed during stop, the tape is
reviewed at high speed. Its lamp lights at this time.
When it is pressed during playback or pause, the tape is
reviewed at approximately 4 times the normal tape speed.
Both the PLAY lamp and REW lamp light at this time.
During the jump operation, the REW lamp flashes.
When this button is pressed during stop, the tape is
reviewed at high speed. Its lamp lights at this time.
When it is pressed during playback or pause, the tape is
reviewed at approximately 4 times the normal tape speed.
Both the PLAY lamp and REW lamp light at this time.
During the jump operation, the REW lamp flashes.
H
FF (fast forward) button and lamp
When this button is pressed during stop, the tape is cued
at high speed. Its lamp lights at this time.
When it is pressed during playback or pause, the tape is
cued at approximately 4 times the normal tape speed.
Both the PLAY lamp and FF lamp light at this time.
When this button is pressed during stop, the tape is cued
at high speed. Its lamp lights at this time.
When it is pressed during playback or pause, the tape is
cued at approximately 4 times the normal tape speed.
Both the PLAY lamp and FF lamp light at this time.
I
EMERGENCY screw (inside rubber cap)
If the cassette does not eject even when the EJECT
button is pressed, use a screwdriver or similar implement
to push and turn the EMERGENCY screw at the same
time: this will cause the cassette to be ejected.
For details, refer to “6-3-3 Emergency eject.”
If the cassette does not eject even when the EJECT
button is pressed, use a screwdriver or similar implement
to push and turn the EMERGENCY screw at the same
time: this will cause the cassette to be ejected.
For details, refer to “6-3-3 Emergency eject.”
Chapter 2 Parts and their functions
(continued)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.27 10:08 AM ページ16