Panasonic AJ-HDX900 Benutzerhandbuch
24
Procedure for shooting
From adjusting the white balance and black
balance to stopping the recording
balance to stopping the recording
1
Select the filter to match the lighting conditions.
2
-1
If the white balance has been stored in the
memory ahead of time:
Set the WHITE BAL switch to “A” or “B.”
memory ahead of time:
Set the WHITE BAL switch to “A” or “B.”
2
-2
If the white balance and/or black balance have not
been stored in the memory and there is no time to
adjust the white balance:
Set the WHITE BAL switch to PRST.
The white balance for the filter is achieved in
accordance with the setting position of the CC FILTER
control (outer).
been stored in the memory and there is no time to
adjust the white balance:
Set the WHITE BAL switch to PRST.
The white balance for the filter is achieved in
accordance with the setting position of the CC FILTER
control (outer).
2
-3
When adjusting the white balance on the spot:
Select the filter to match the lighting conditions, set the
WHITE BAL switch to “A” or “B” and adjust the white
balance as follows:
Select the filter to match the lighting conditions, set the
WHITE BAL switch to “A” or “B” and adjust the white
balance as follows:
1 Press the AUTO W/B BAL switch to the AWB
position and adjust the white balance.
2 Press the AUTO W/B BAL switch to the ABB
position and adjust the black balance.
3 Press the AUTO W/B BAL switch to the AWB
position and adjust the white balance again.
* For details on how to perform the adjustments, refer to “4-2-1
Adjusting the white balance” and “4-2-2 Adjusting the black
balance.”
balance.”
3
Point the camera at the subject, and adjust the focus
and zoom.
and zoom.
4
When the electronic shutter is to be used, set the shutter
speed and operating mode.
speed and operating mode.
* For further details, refer to “4-3 Setting the electronic shutter.”
5
Press the REC START button or lens VTR button to start
recording.
During recording, the REC lamp inside the viewfinder
lights.
recording.
During recording, the REC lamp inside the viewfinder
lights.
6
To stop the recording, press the REC START button
again.
The REC lamp inside the viewfinder goes off.
again.
The REC lamp inside the viewfinder goes off.
From adjusting the white balance and black balance to stopping the
recording
recording
1
3
2-
1, 2, 3
2-
3
4
5, 6
Tape function buttons
During recording, the tape function buttons (EJECT, REW,
FF, PLAY/PAUSE and STOP) will not work.
FF, PLAY/PAUSE and STOP) will not work.
Chapter 3 Recording and playback
(continued)
CAUTION:
The unit records video and audio signals into the built-in
memory once, and then reads these signals out and
records them on tape. Thus, video images or voice for 2 to
3 seconds will be recorded on tape, when you start
recording while the VTR SAVE/STBY switch is set to the
SAVE position and then stop it immediately by pressing the
REC START button or the VTR button on the lens.
The unit records video and audio signals into the built-in
memory once, and then reads these signals out and
records them on tape. Thus, video images or voice for 2 to
3 seconds will be recorded on tape, when you start
recording while the VTR SAVE/STBY switch is set to the
SAVE position and then stop it immediately by pressing the
REC START button or the VTR button on the lens.
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ24