Panasonic AJ-HDX900 Benutzerhandbuch

53

;

UM: USER MAIN
U1: USER1 button
U2: USER2 button

INH

S.GAIN  ¢¢dB/OFF
DS.GAIN  ¢¢

:/OFF

LINE MIX ON/OFF
S.IRIS  ON/OFF
I.OVR  ON/OFF
S.BLK  –¢¢/OFF

B.GAMMA ON/OFF

AUDIO CH1

AUDIO CH2

REC SW

Y GET ON

RET SW

DRS

“INH” is indicated when the operation of the USER button has been
disabled.
This indicates the value selected for S.GAIN.
This indicates the value selected for DS.GAIN.
This indicates whether LINE MIX GAIN is set to ON or OFF.
This indicates whether S.IRIS is set to ON or OFF.
This appears when the IRIS OVERRIDE setting is enabled (ON).
This indicates whether SUPER BLACK is set to ON or OFF and, if it is
set to ON, it also indicates its value.
This indicates whether BLACK GAMMA (black level gradation
compensation) is set to ON or OFF.
This appears when the input signal to recorded on audio channel 1
has been switched.
This appears when the input signal to recorded on audio channel 2
has been switched.
This appears only during MODE CHECK button operations while the
USER button functions as the REC switch.
This appears when the function for measuring the output brightness
level (in % units for approx. 3 seconds for the area near the center
marker) is ON.
This appears only during MODE CHECK button operations while the
USER button functions as the RET switch.
This appears when the DRS function is turned on.

<

EX2

This appears when the lens extender is in use.

=

¢

.¢K

This indicates the color temperatures assigned to the A, B, and PRE
positions of the WHITE BAL switch. (These may be memory values
during AWB operation or menu setting values.)

@

6

:/10:/12:/15:/20:

This indicates the value of the cumulative gain (DS.GAIN) when this
gain function is working.

B

¢¢

dB

This indicates the current gain value.

A

M

This appears when LINE MIX GAIN (+6 dB) is active.

?

A
B
P

This indicates that the WHITE BAL switch is set to channel A.
This indicates that the WHITE BAL switch is set to channel B.
This indicates that the WHITE BAL switch is set to PRE.

>

1 to 4
A to D
–

This indicates the position of the ND filter.
This indicates the position of the CC filter.
This indicates that the filter has not been set to a proper position.

C

REC WARNING 
SLACK E-¢¢

HUMID
SERVO

RF
BACKUP BATT EMPTY
WIRELESS-RF

This indicates that a problem has occurred during recording.
This indicates that a problem has occurred in a mechanism.
Depending on the nature of the trouble concerned, the power may be
turned off automatically.
This indicates that condensation has formed.
This indicates that servo lock has not been initiated during recording
or playback.
This indicates that the level of the signals from the tape has dropped.
This signals that it is time to replace the backup battery.
This indicates that the level of the RF signal from the wireless
microphone receiver has dropped.
<Note>
For details on the codes displayed in this area, refer to “6-3-2 Error
codes.”

D

TCG

12:59:59:20

TCR

12:59:59:20

(V)UBG

AB CD EF 00

(V)UBR

12 34 56 78

CTL

–01:59:59:20

This indicates the TCG (time code generator) value.
This indicates the TCR (time code reader) value.
This indicates the UBG VUBG display.
This indicates the UBR VUBR display.
This indicates the CTL-COUNTER value.

01.AJ-HDX900_P_E(VQT0X86)_E  06.6.22  12:52 PM  ページ53