Panasonic AJ-HDX900 Benutzerhandbuch

67

Perform the menu operations, and display the “CARD
READ/WRITE” screen.
If the data is given a title when it is saved, the title will
also be displayed.

Turn the JOG dial button to select any number from 1 to
8, and press the JOG dial button.

Turn the JOG dial button to move the arrow (cursor) to
the R.SELECT item and press the JOG dial button.

Turn the JOG dial button to move the arrow (cursor) to
YES, and press the JOG dial button.  
When the data saving is completed, the following
message appears.

Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.

< CARD READ/WRITE >

# R.SELECT          1

READ

W.SELECT          1

WRITE

CARD CONFIG
TITLE READ

TITLE:
1: ********  5: ********
2: ********  6: ********
3: ********  7: ********
4: ********  8: ********

WRITE OK

When the JOG dial button is pressed, the arrow (cursor)
returns to the TITLE: item.

Turn the JOG dial button to move the arrow (cursor) to
the WRITE item.

When the JOG dial button is pressed, the following
message appears.

When the title has been input, turn the JOG dial button
to move the arrow (cursor) to the “:” position.

< CARD READ/WRITE >

R.SELECT          1

READ

W.SELECT          1

WRITE

CARD CONFIG
TITLE READ

TITLE:
1: ********  5: ********
2: ********  6: ********
3: ********  7: ********
4: ********  8: ********

;

WRITE?

YES

#

NO

TITLE:

WRITE NG NO CARD
(setup card has not been inserted)

Insert the card.

WRITE NG FORMAT ERROR
(formatting error)

The card was formatted by a device
other than the unit.
Replace the card.

WRITE NG ERROR
(the data cannot be saved)

The card may be defective.
Replace it.

WRITE NG
WRITE PROTECT

Remove the card to cancel write
protect.

01.AJ-HDX900_P_E(VQT0X86)_E  06.6.22  12:52 PM  ページ67