Panasonic PV-GS80 Betriebsanweisung
Playback mode
40
LSQT1121
Playback mode
Playing back tape
≥Set to Tape Playback Mode.
(An operation icon automatically appears on
the LCD monitor.)
the LCD monitor.)
1
Operate with joystick.
1/;: Playback/Pause
6:
6:
Rewind/Review playback (Reverts to
playback with the
playback with the
1/; icon.)
5:
Fast forward/Cue playback (Reverts to
playback with the
playback with the
1/; icon.)
∫:
Stop
≥The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted during Tape playback mode.
retracted during Tape playback mode.
≥During cue/review playback, fast-moving
images may show noise as a mosaic.
≥Before and after cue/review playback, the
screen may become blue for a moment or
images may be disturbed.
images may be disturbed.
ª
To adjust volume
Adjust the speaker volume for playback.
1
Move the [
s
/VOL
r] lever to adjust the
volume.
Towards [
r]: increases the volume
Towards [
`]: decreases the volume
(The nearer the bar is to [
r], the higher the
volume.)
≥When the adjustment is completed, the volume
indication will disappear.
≥If you do not hear the sound, check the settings
of [SETUP] >> [12bit AUDIO].
ª
Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
rewound and played back again.
1
Set [ADVANCED] >> [REPEAT PLAY] >>
[ON].
[ON].
≥The [
] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] >> [OFF] or turn off the
power.)
[REPEAT PLAY] >> [OFF] or turn off the
power.)
ª
Settings on the audio
≥If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] >> [12bit AUDIO].
[SETUP] >> [12bit AUDIO].
≥When you record the audio in [12bit] and set
[SETUP] >> [12bit AUDIO] >> [MIX], the audio
will be played back in stereo sound regardless
of the settings in [AUDIO OUT].
will be played back in stereo sound regardless
of the settings in [AUDIO OUT].
PC
VOL
S5660.book 40 ページ 2006年11月1日 水曜日 午前9時43分