Panasonic PV-GS80 Betriebsanweisung

Menu

LSQT1121

ª

This switches between date and time indications.
≥The Camcorder automatically records the date 

and time the picture was taken on the tape/card.

ª

Switches the audio (PCM audio) recording 
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. 

(The original sound recorded is preserved 
after audio dubbing.) 

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. 

Audio can be recorded in higher quality. 
(The original sound recorded is erased 
after audio dubbing.)

≥Audio dubbing cannot be performed on this unit. 

If you want to edit the sound on a model with an 
audio dubbing function, set [12bit] to take 
pictures.

ª

Set to [ON] and the display mode can be switched 
to all functions. Set to [OFF] and it can be 
switched to minimum display.

ª

Set to [ON] and confirmation/alarm beeps are 
issued as follows.
1 Beep
≥When you start recording
≥When you turn on the power
≥When the unit goes from quick start standby 

mode to recording pause

2 Beeps
≥When you pause recording
≥When you turn off the power
≥When the unit goes into quick start standby 

mode 

2 Beeps for 4 times
≥When a cassette with its erasure prevention tab 

set to [SAVE] is inserted, condensation occurs 
(

), and at other times. Check the sentence 

displayed on the screen. (

)

ª

If you want to edit the sound on a model with an 
audio dubbing function, set [12bit] to take 
pictures.
You can switch the sound (PCM Audio) when 
playing back a tape with sound recorded in 
[12bit].
[ST1]: It only plays back the original sound 

recorded.

[ST2]: It only plays back the sound on the tape 

added with audio dubbing.

[MIX]:

It simultaneously plays back both [ST1] 
and [ST2] sounds.

≥Audio dubbing cannot be performed on this unit. 

When playing back a tape recorded on this unit, 
you will not be able to hear the sound if [ST2] is 
set. Set [ST1].

ª

This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub 

sound) 

[L]:

Left channel sound (main sound) 

[R]:

Right channel sound (sub sound) 

ª

When there is a menu that cannot be selected 
depending on a combination of functions, set to 
[YES] for changing the menu settings back to the 
initial shipping condition.
(Language setting cannot be back to the initial 
shipping condition.)

ª

If you set to [DEMO MODE] >> [ON] without 
inserting a cassette and a card, the Camcorder is 
automatically set to the demonstration mode for 
introducing its functions. If any button is pressed 
or operated, the demonstration mode is canceled. 
If no operations take place for approx. 
10 minutes, the demonstration mode 
automatically starts. To terminate the 
demonstration mode, insert a cassette or a card, 
or set to [DEMO MODE] >> [OFF]. For normal 
use, set this function to [OFF].

S5660.book  58 ページ  ２００６年１０月３０日　月曜日　午後６時５６分