Panasonic F0707K0 -M Benutzerhandbuch
25
Preparations
Model number
Capacity
DVCPRO/DV
Audio 2CH
DVCPRO50
Audio 4CH
DVCPRO HD∗
1
AJ-P2C004HG
4 GB
Approx. 16 minutes
Approx. 8 minutes
Approx. 4 minutes
AJ-P2C008HG
8 GB
Approx. 32 minutes
Approx. 16 minutes
Approx. 8 minutes
AJ-P2C016RG
16 GB
Approx. 64 minutes
Approx. 32 minutes
Approx. 16 minutes
• AJ-P2C002SG (2 GB) cards cannot be used.
• The memory needed for management and other purposes is included in the memory figure displayed, so
• The memory needed for management and other purposes is included in the memory figure displayed, so
the amount of memory you can use for recording is less than what is displayed.
• Concerning dividing the clips recorded on P2 cards
If, when a P2 card with a memory capacity of 8 GB or more is used in this unit, the continuous recording
If, when a P2 card with a memory capacity of 8 GB or more is used in this unit, the continuous recording
time for a single session exceeds the time shown in the table below, the recording will automatically
continue as another clip. Furthermore, when performing thumbnail operations (such as display, delete,
repair or copy) for clips using the P2 device, these operations can be performed with all the clips treated
as a single clip. The clips may be displayed as separate clips by non-linear editing software and PCs.
continue as another clip. Furthermore, when performing thumbnail operations (such as display, delete,
repair or copy) for clips using the P2 device, these operations can be performed with all the clips treated
as a single clip. The clips may be displayed as separate clips by non-linear editing software and PCs.
• When any other kind of card is used, you may need to update the driver installed in the unit. (Page 86)
P2 card recording durations
Concerning P2 cards
Using the USER buttons
One of ten different functions can be allocated to
each of USER1, 2 and 3 buttons.
each of USER1, 2 and 3 buttons.
USER1: SYS FORMAT
USER2: SHOT MARK
USER3: TEXT MEMO
USER2: SHOT MARK
USER3: TEXT MEMO
For details, refer to the USER1-3 items (page 74)
on the setting menu “SW MODE” screen.
• The function allocated to [USER] is displayed
on the setting menu “SW MODE” screen.
• The function allocated to [USER] is displayed
when [MENU] and [MODE] are pressed together
on the thumbnail display off screen.
on the thumbnail display off screen.
Charging the internal battery
The date (year/month/day) and time are stored in
the memory by the internal battery. When the
the memory by the internal battery. When the
display has appeared on the LCD monitor screen,
it means that the internal battery charge is low.
Follow the steps below to charge the battery. After
the battery has been fully charged, set the date
and time.
it means that the internal battery charge is low.
Follow the steps below to charge the battery. After
the battery has been fully charged, set the date
and time.
1
Connect the AC adapter to the unit.
Keep the unit’s power turned off.
2
Maintain this condition for about 4 hours.
The internal battery will now be charged.
After charging, check the TC and menu.
After charging, check the TC and menu.
If
appears even after the internal battery has
been charged, the battery must be replaced. Ask
your dealer for another battery.
your dealer for another battery.
Recording format
Recording time
DVCPRO HD∗
1
Approx. 5 minutes
DVCPRO50
Approx. 10 minutes
DVCPRO/DV
Approx. 20 minutes
∗1 720P/30PN and 720P/24PN are excluded from the
DVCPRO HD formats.
Other