Panasonic F0707K0 -M Benutzerhandbuch
Saving data
51
Copying data from P2 cards to the hard drive (USB HOST mode)
Switching to the USB HOST mode
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
The thumbnail screen now appears.
The thumbnail screen now appears.
2
Press [MODE] to display the thumbnail
display off screen.
3
Press [MENU].
4
Using [STOP], [PLAY] and [STILL], select
“OTHER FUNCTIONS” – “PC MODE”, and
press [STILL].
press [STILL].
5
Using [STOP] and [PLAY], select
“USBHOST”, and press [STILL].
6
Press [MENU] twice to display the thumbnail
display off screen.
7
Press [MODE] to display the thumbnail
display screen.
8
Hold down [MODE] for at least 2 seconds.
The USB HOST mode is now established,
and “USBHOST” appears at the bottom of the
thumbnail screen.
and “USBHOST” appears at the bottom of the
thumbnail screen.
To exit the HOST mode
1
Hold down [POWER] for at least 2 seconds
to turn off the unit’s power.
The PC mode cannot be released simply by
holding down [MODE].
• While files are being transferred, the power
The PC mode cannot be released simply by
holding down [MODE].
• While files are being transferred, the power
will not be turned off even when [POWER] is
pressed.
pressed.
Usable hard drives
The following hard drive can be used.
• Panasonic portable hard disk unit for P2 Store (AJ-PCS060G)
• Any hard drive which can be connected using USB 2.0
• Panasonic portable hard disk unit for P2 Store (AJ-PCS060G)
• Any hard drive which can be connected using USB 2.0
• USB bus power (5 V, 0.5 A) is also supported, but some hard drives cannot be started up using it. If this
is the case, supply power from a separate source to the hard drive.
• Hard drives with a memory size of 2 TB or more are not supported.