Panasonic PV-GS55 Benutzerhandbuch
Before Use
-24-
[DATE/TIME]
Date and Time Indication
Date and Time Indication
4) [LCD/EVF]
Adjusting Brightness and Color Level
[LCD/EVF SET]
LCD and Viewfinder Adjustment
Adjusting Brightness and Color Level
[LCD/EVF SET]
LCD and Viewfinder Adjustment
[EVF ON/AUTO]
Using the Viewfinder
Using the Viewfinder
[REMOTE]
Remote Controller Mode
Remote Controller Mode
Setting Date and Time
Since the internal clock of the Palmcorder has a
slight imprecision make sure to check the time
before recording.
slight imprecision make sure to check the time
before recording.
1
Set [INITIAL] >> [CLOCK SET] >> [YES].
2
Press the [
;/∫] Button to select [YEAR],
[MONTH], [DAY], [HOUR] or [MIN.] and
press the [
press the [
6/5] Button to set it to the
desired value.
≥Year will cycle in the order shown below.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
to finish
setting the date and time.
≥The clock operation starts from [00] second.
≥The clock operation starts from [00] second.
≥If the built-in battery is weak, the [
0] Indication
flashes. In this case, charge the built-in battery.
≥The clock uses the 12-hour system.
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation
of the clock. When the [
of the clock. When the [
0] Indication flashes,
the internal lithium battery is near exhaustion.
MENU
STILL
ENTER
FADE
i
s
CLOCK SET
1YEAR :2004
MONTH :JUL
DAY :12
HOUR : 3PM
MIN. :17
MONTH :JUL
DAY :12
HOUR : 3PM
MIN. :17
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
1
Connect the AC Adaptor to the Palmcorder
with the power turned off and then connect
to the AC Jack.
with the power turned off and then connect
to the AC Jack.
≥After charging for 4 hours, the built-in lithium
battery can power the clock for approximately
3 months.
3 months.
LP Mode
A desired recording speed can be selected with
[REC SPEED] on the [RECORDING] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP
Mode.
Although the image quality does not decrease
with the LP Mode recording, mosaic-pattern noise
may appear on a playback image, or some
normal functions may be restricted.
≥The contents that are recorded in LP Mode are
[REC SPEED] on the [RECORDING] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP
Mode.
Although the image quality does not decrease
with the LP Mode recording, mosaic-pattern noise
may appear on a playback image, or some
normal functions may be restricted.
≥The contents that are recorded in LP Mode are
not completely compatible with other
equipment.
equipment.
≥Audio dubbing is not possible with LP Mode.
(
Audio Recording Mode
The sound quality of the recorded sound can be
selected with [AUDIO REC] on the
[RECORDING] Sub-Menu.
High sound-quality recording is possible with
“16 bit 48 kHz 2 track” Mode. With the “12 bit
32 kHz 4 track” Mode, the original sound can be
recorded on 2 tracks in stereo, while the other
2 tracks can be used for Audio Dubbing.
selected with [AUDIO REC] on the
[RECORDING] Sub-Menu.
High sound-quality recording is possible with
“16 bit 48 kHz 2 track” Mode. With the “12 bit
32 kHz 4 track” Mode, the original sound can be
recorded on 2 tracks in stereo, while the other
2 tracks can be used for Audio Dubbing.
PV-GS55PP_Eng.book 24 ページ ２００４年２月１０日 火曜日 午前１１時５１分