Panasonic PV-GS31 Benutzerhandbuch

Others

You can change the Menu settings back to the 
shipping condition.

•  The initializing takes a little while.

•  Initializing will not erase a clock setting (p. 24) that 

has been adjusted.

„ To Display  Date/Time Indication

This switches between date and time indications.
Set [   BASIC] or [   ADVANCE] >> [   DATE/TIME] 
>> [D/T], [DATE] or [OFF]. (pp. 22, 23)
•  The Camcorder automatically records the date and 

time of picture taking on the tape.

•  You can also show or change the Date/Time 

Indication by repeatedly pressing the [DATE/TIME] 
Button on the Remote Control (PV-GS35 only).

„ To Change the Display Mode

Set [   SETUP] >> [   DISPLAY] >> [ON] or [OFF]. 
Set to [ON] and the display mode can be switched to 
all functions. Set to [OFF] and it can be switched to 
minimum display. (pp. 22, 23)

„ Progressive Photoshot

You cannot use the Progressive Photoshot Function in 
the following cases.

•  Digital Zoom [ 

 ]

•  1/750 s or faster shutter speed
•  When brightness is insufficient
•  When the MagicPix Function is ON
•  When the Portrait is used
•  When the Gain Up mode is set to ON

•  When brightness is insufficient
•  When the Gain Up mode is set to ON

„ Power Save Mode

Set [   SETUP] >> [   POWER SAVE] >> 
[5 MINUTES] or [OFF].

[OFF]:
When about 5 minutes passed without any operation, 
the standby mode automatically will be set. In the 
standby mode, [   ] blinks and it takes time more than 
usual to start recording after you press the Recording 
Start/Stop Button.
[5 MINUTES]:
When about 5 minutes passed without any operation, 
the Camcorder automatically turns off to protect the 
tape or to prevent the battery from running down. 
When you use the Camcorder, turn it on again.
•  The Camcorder cannot be automatically turned off 

when you connect the USB Cable or the DV Cable 
with the Camcorder or when the Camcorder is in the 
PC Mode.

QXGA

:

2 048 or more

 (White):

Photoshot Mode

 (Red):

While Photoshot recording is activated

 (Green):

While the Card being read

 (Red):

Using the card that cannot be 
recognized

If any one of the following indications lights up or 
flashes, please check the Camcorder.

 :

A cassette with the accidental erasure 
prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.

[--] / 

:

The built-in battery is low. (p. 24)

 :

The Warning/Alarm Indication appears 
when you record yourself. Turn the LCD 
Monitor towards the Viewfinder and check 
the Warning/Alarm Indication.

 :

No card is inserted.

REMOTE: An incorrect Remote Control mode has 

been selected. (pp. 14~15)

 END : The tape came to the end during 

recording.

 :

The video heads are dirty. (p. 65)

 DEW DETECT/

 EJECT TAPE:

Condensation has occurred. Take out the 
cassette and wait for a while. It takes some time 
until the cassette holder opens, but this is not a 
malfunction. (p. 64)

TAPE END:

The tape came to the end during recording.

NEED HEAD CLEANING:

The video heads are dirty. (p. 65)

PUSH THE RESET SWITCH:

An irregularity in the equipment has been 
detected. Press the [RESET] Button (p. 70). This 
may solve the problem.

LOW BATTERY:

The Battery is low. Recharge it. (p. 15)

NO TAPE:

No tape is inserted. (p. 17)

CHECK REMOTE MODE:

An incorrect Remote Control Mode has 
been selected. This is only displayed at the 
first operation of the Remote Control after 
powering-on. (pp. 14~15)