Panasonic DVX100B Benutzerhandbuch

Before using the battery, fully charge it with the AC 
adapter.
Keep a spare battery with you.

Align the battery with the “ 

 ” marking on the 

AC adapter, place it flat, and slide it in the 
direction shown below.
• You cannot charge the battery if the DC cord 

is connected to the DC OUT connector, so 
disconnect it first.

Plug the AC cord into the power outlet.
• The POWER lamp and CHARGE lamp on the 

AC adapter light, and charging begins.

• If the CHARGE lamp does not light when 

attached, detach the battery and then attach 
it again.

When the battery is charged, the CHARGE 
lamp on the AC adapter goes out.

Slide the battery and remove it.

• Times given above are approximate. Figures in 

parentheses show the recording times when you use 
the LCD monitor.

• The times apply when the ambient operating 

temperature is 68°F (20°C) and humidity is 60%. 
Charging may take longer at other temperatures and 
humidity levels.

Approx. 330 min.

Approx. 360 (or 300) min.

• The battery becomes hot while it is being used or 

charged. 
The camera-recorder itself also becomes hot 
during use.

• The recordable time reduces if you repeatedly 

start and stop recording.

• Discharge the battery before storing it. 

When storing it for an extended time, charge it at 
least once a year, use up its charge in the 
camera-recorder, and then store it again.

• If the battery is extremely hot or cold, the 

CHARGE lamp will blink several times before 
charging starts.

• If the CHARGE lamp continues to blink even 

when the battery temperature is normal, there 
may be something wrong with the battery or AC 
adapter. Contact your dealer.

• The battery takes longer to charge when it is 

warm.

• The AC adapter can interfere with radio reception 

so keep radios at least 1 meter away from it.

• The AC adapter may make some noise when you 

are using it, but this is normal.

• You cannot charge the battery when supplying 

power to the camera-recorder from the AC 
adapter.