Panasonic DVX100B Benutzerhandbuch
39
Adjusting the shutter speed
Shutter speeds you can select
1
Each time you press the SHUTTER button, the
shutter speed switches between normal (OFF)
and the speed you selected with the SPEED
SEL button.
shutter speed switches between normal (OFF)
and the speed you selected with the SPEED
SEL button.
2
After you have pressed the SHUTTER button,
press SPEED SEL to select the shutter speed.
The shutter speed changes as follows each
time you press SPEED SEL.
When progressive mode is OFF (60i)
press SPEED SEL to select the shutter speed.
The shutter speed changes as follows each
time you press SPEED SEL.
When progressive mode is OFF (60i)
When progressive mode is on (30P/24P/24PA)
• Remember that the faster the shutter speed,
the lower the sensitivity.
• If iris is set to auto, then it will open wider with
higher shutter speeds and thereby reduce
focal depth.
focal depth.
• If you have set slow shutter mode (Page 40),
you cannot change shutter speeds
(“INVALID” appears on the screen).
First press the USER button you have
allocated to SLOWSHUT to cancel the slow
shutter mode, then change the shutter speed
as shown above.
(“INVALID” appears on the screen).
First press the USER button you have
allocated to SLOWSHUT to cancel the slow
shutter mode, then change the shutter speed
as shown above.
With artificial lighting and especially fluorescent
lights and mercury-vapor lamps, the luminance
changes in synchronization with the power line
frequency. When this frequency is 50 Hz, mutual
interference will occur between the camera-
recorder’s vertical sync frequency (approx. 60 Hz)
and the lighting frequency (50 Hz). This means that
the white balance may change periodically.
Before shooting in areas with artificial lighting or
adjusting the white balance, set the shutter speed
as follows.
lights and mercury-vapor lamps, the luminance
changes in synchronization with the power line
frequency. When this frequency is 50 Hz, mutual
interference will occur between the camera-
recorder’s vertical sync frequency (approx. 60 Hz)
and the lighting frequency (50 Hz). This means that
the white balance may change periodically.
Before shooting in areas with artificial lighting or
adjusting the white balance, set the shutter speed
as follows.
Progressive
mode
Normal shutter
speeds (OFF)
Shutter speeds you can select with SPEED SEL
SYNCHRO SCAN
Shutter speed selected
OFF (60i)
1/60
1/60.3 - 1/250
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
30P
1/50
1/30.1 - 1/250.0
1/30, 1/60, 1/120, 1/250, 1/500, 1/1000
24P/24PA
1/50
1/24.1 - 1/250.0
1/24, 1/60, 1/120, 1/250, 1/500, 1/1000
SPEED SEL button
SHUTTER button
SYNCHRO
SCAN
1/100
1/120
1/250
1/500
1/1000
1/2000
SYNCHRO
SCAN
1/30
1/60
1/120
1/250
1/500
1/1000
(1/24)
Progressive
mode
Shutter speed
50 Hz
60 Hz
OFF (60i)
1/100
OFF (1/60)
30P
OFF (1/50)
1/60
24P/24PA
OFF (1/50)
1/60
1/100
PUSH STILL
The current shutter speed appears on the
viewfinder and LCD screens unless you have
selected OFF in OTHER DISPLAY in the DISPLAY
SETUP screen of the setup menus. It is not
displayed if you have set the shutter speed to
normal (OFF).
viewfinder and LCD screens unless you have
selected OFF in OTHER DISPLAY in the DISPLAY
SETUP screen of the setup menus. It is not
displayed if you have set the shutter speed to
normal (OFF).
Shoo
ti
ng