Panasonic PV-GS300 Benutzerhandbuch
Record mode
29
LSQT0974
Recording on a tape
≥Set to Tape Recording Mode.
≥The lens cover opens automatically.
1
Press the recording start/stop button to
start recording.
start recording.
2
Press the recording start/stop button again
to pause recording.
to pause recording.
≥For the recording time on a tape, refer to
≥Carry out a recording check (
) to verify that
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search (
) .
≥If you want to preserve the original sound
recorded when audio dubbing (
), set
[ADVANCED] >> [AUDIO REC] >> [12bit] to
take pictures.
take pictures.
ª
On-screen display in the tape
recording mode
recording mode
¢These are only displayed when you press the
[PHOTO SHOT] button halfway while a card is
inserted.
These are not displayed when using the remote
control.
inserted.
These are not displayed when using the remote
control.
)
5) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
indication will flash in red.)
6) Quality of still pictures
ª
Concerning the remaining tape time
indication on the screen
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
indication starts flashing.)
≥During a 15-second or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
is 2 to 3 minutes shorter than the actual
remaining tape time.
ª
[POWER SAVE]
[OFF]:
When 5 minutes passes without
any operation, the standby mode
will be automatically set. In the
standby mode, [
any operation, the standby mode
will be automatically set. In the
standby mode, [
;] blinks and it
takes more time than usual to start
recording after you press the
recording start/stop button.
recording after you press the
recording start/stop button.
[5 MINUTES]: When 5 minutes passes without
any operation, the Camcorder
automatically turns off to protect
the tape or to prevent the battery
from running down. When you
want to use the Camcorder, turn it
on again.
automatically turns off to protect
the tape or to prevent the battery
from running down. When you
want to use the Camcorder, turn it
on again.
≥In the following cases, the power may not turn
off even when set [POWER SAVE] >>
[5 MINUTES].
[5 MINUTES].
≥When connecting to the AC outlet
(When using the AC adaptor)
≥When connecting the USB cable or the DV
cable to a personal computer or other
equipment
equipment
≥When the PC Connection Mode
PC
;
R 0:30
0h00m10s00f
100
100
1)
2)
3)
¢
5)
¢
6)
¢
0.2
4)
¢
LSQT0974_ENG.book 29 ページ 2005年11月7日 月曜日 午前11時58分