Panasonic PV-GS320 Benutzerhandbuch
Record mode
31
LSQT1091
ASPECT [4:3]:
: 1280
k960
: 640
k480
Recording still pictures onto a card
(Photoshot)
(Photoshot)
≥Set to Card Recording Mode.
1
Press the Photoshot button [
] halfway in
order to adjust focusing.
(For auto focusing only)
≥If you set [O.I.S.] to [ON], then the image
(For auto focusing only)
≥If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([
([
(MEGA Optical image stabilizer)] will
be indicated.)
≥The iris/gain value is fixed and this
Camcorder focuses on the subject
automatically.
automatically.
1 Shutter chance mark
± (The white lamp flashes.):
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful
≥The shutter chance mark is indicated as
follows when the Photoshot button [
] is not
pressed halfway. Please use it as a guide for
recording.
recording.
¥ (The green lamp lights up.):
When in focus and a good picture
can be recorded
can be recorded
± (The white lamp lights up.):
Almost in focus
2 Focus area
2
Press the Photoshot button [
] fully.
ª
To record still pictures clearly
≥When zooming in on the subject with a
magnification of
4k or higher, it is difficult to
reduce the slight shaking from holding the
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
your arms stationary at your side so as not to
shake the Camcorder.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
≥For the number of still pictures that can be
recorded on a card, refer to
-78-
.
≥Moving pictures and sound cannot be recorded
onto a card.
≥While data is being recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not remove the
card.
≥Another product may degrade or not play back
data recorded on this Camcorder.
≥If you set [PICT.QUALITY] >> [
], mosaic-
pattern noise may appear on a playback image
depending on the picture content.
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[
] or [
], the mega pixel recording mode
is set.
≥It is not possible to press the [PHOTO SHOT]
button on the remote control halfway.
ª
On-screen display in the card
recording mode
recording mode
1) Still picture size
2) Card indication (
2) Card indication (
-66-
)
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
indication will flash in red.)
4) Quality of still pictures
ª
Select the size of still pictures to be
recorded on a card
recorded on a card
1
Set [BASIC] >> [PICTURE SIZE] >> select
the desired picture size.
the desired picture size.
ASPECT [16:9]:
:2048
k1152
:640
k360
ASPECT [4:3]:
1
M
0.3
M
MEGA
1
2
2
0.2
0.3
M
100
100
1)
3)
4)
2.4
2)
2.4
0.2
LSQT1091_ENG.book 31 ページ ２００６年１１月２７日 月曜日 午後１時１７分