Panasonic PV-GS36 Benutzerhandbuch

Seite von 76
26
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
 Recording a Still Picture on a Card 
(Photoshot)
Still pictures can be recorded on the Memory Card 
from the Camcorder.
•  Open the LCD Monitor or extend the Viewfinder 
before turning on the power.
1
  Set the [OFF/ON] Switch to [ON].
•  The [STATUS] Indicator lights Red.
Recording “ Simultaneous Motion/
Still Record Mode”
You can record still pictures while recording image 
onto a tape.
• Set to Tape Recording Mode.
1
  Press the [PHOTO SHOT] Button fully 
while recording image onto a tape.
4/4 NEXT
 To Check the Recording
Notes:
•  For the number of still pictures to be recorded on a 
card, refer to page 27.
•  When recording pictures onto a card, the Recording 
Start/Stop Button is disabled.
•  You can select a picture quality for still pictures to 
be recorded. (p. 27)
•  In order to record higher quality still pictures, you 
must use the Card Recording Mode.
You can play back the last few seconds of the 
recorded scene in the Recording Pause Mode.
• Set to Tape Recording Mode.
1
  Press the Joystick Control to display the 
One-Touch Navigation icon on the lower 
right of the screen.
2
  Move the Joystick Control [▼] until the 
page with [   ] indication is displayed.
[One-Touch Navigation icon]
3
  Move the Joystick Control [◄] to select 
[   ].
•  The [RECORDING CHECK STARTED] and 
the [   ] indication is displayed. After checking, 
the Camcorder resumes the Recording Pause 
Mode.
Finding the End of Recording
( Blank Search Function)
•  Approximately 1 second before the last 
recorded scene, the Camcorder switches to the 
Recording Pause Mode or the Still Playback 
Mode.
•  If there is no blank left on the Cassette, the 
Camcorder stops at the end of the tape.
2
  Move the Joystick Control [▼] until the 
page with [   ] indication is displayed.
         
S P   3 h 5 9 m 5 9 s 2 9 f
                                   
R   2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N     2   2 0 0 6
   
1 0 0
„
 To Cancel the Blank Search Function 
Before Completion
Move the Joystick Control [▼] to select [   ].
4/4 NEXT
[One-Touch Navigation icon]
3
  Move the Joystick Control [►] to select 
[   ].
•  A confirmation message appears.
YES
NO
SETUP   ENTER    EXIT
PERFORM BLANK SEARCH?
4
  Move the Joystick Control [▲] or [▼] 
to select [YES] and press the Joystick 
Control.
•  The [   ] indication and the One-Touch 
Navigation icon appears during the Blank 
Search.
The Blank Search Function aids you in locating the 
end of the recording on the Cassette quickly (unused 
part of the tape).
• Set to Tape Recording/Playback Mode.
1
  Press the Joystick Control to display the 
One-Touch Navigation icon on the lower 
right of the screen.