Panasonic PV-GS36 Benutzerhandbuch

The recorded scene can be played back immediately 
after the recording.
•  Open the LCD Monitor or extend the Viewfinder 

before turning on the power.

•  The [STATUS] Indicator lights Red.

• The [   TAPE PLAYBACK MODE] is displayed 

on the screen.

•  The One-Touch Navigation icon is displayed 

on the lower right of the screen.

•  Rewind the tape to the point where you want to 

start playback.

•  When the tape reaches the beginning, 

rewinding stops automatically.

• The [►] Indication appears.

„

Move the Joystick Control [▼] to select [   ].

•  If a cassette recorded with copyright protection 

signal is played back, the picture is distorted by 
mosaic-like patterns.

•  When the adjustment is completed, the volume 

indication [   ] will disappear.

•  If you do not hear the sound, check the settings of 

[   SETUP] >> [   12bit AUDIO].

Adjust the speaker volume for playback.

•  Towards [+]: increases the volume

Towards [–]: decreases the volume
(Nearer the bar to [+], larger the volume.)

[One-Touch Navigation icon]

When the tape end is reached, the tape will be 
rewound and played back again.

• The [  ►] Indication appears.

„

Set [   REPEAT PLAY] >> [OFF] or set [OFF/ON] 
Switch to [OFF].

•  If you cannot listen to the desired audio when 

playing back a tape, check the settings in 
[   SETUP] >> [   12bit AUDIO].

•  When you record or dub the audio in [12bit] and 

set [   SETUP] >> [   12bit AUDIO] >> [MIX], 
the audio will be played back in stereo sound 
regardless of the settings in [   AUDIO OUT].

         

S P   3 h 5 9 m 5 9 s 2 9 f

                                   

R   2 : 0 0

1 2 : 3 4 : 5 6 A M
J A N     2   2 0 0 6

           

2 8

         

S P   3 h 5 9 m 5 9 s 2 9 f

                                   

R   2 : 0 0

1 2 : 3 4 : 5 6 A M
J A N     2   2 0 0 6

           

2 8

„

Move the Joystick Control [▲] to select [   ] 
during playback.