Panasonic PV-GS59 Benutzerhandbuch

Seite von 92
17
Before Using
•  “1 h 40 min.” indicates 1 hour and 40 minutes.
•  Battery CGR-DU06 (PV-GS29/PV-GS39/PV-GS59 
U.S.A.) or CGA-DU12 (PV-GS59 Canada) is 
supplied.
•  The times shown in the table are approximate 
times. The numbers indicate the recording time 
when the Viewfinder is used. The numbers in 
parentheses indicate the recording time when the 
LCD Monitor is used. In actual use, the available 
recording time may be shorter.
•  The times shown in the table are for continuous 
recording at a temperature of 25 °C (77 °F) and 
humidity of 60 %. If the Battery is charged at a 
higher or lower temperature, the charging time may 
be longer.
•  We recommend the Battery Pack CGA-DU12 and 
CGA-DU21 for long time recording (2 hours or 
more for continuous recording, 1 hour or more for 
intermittent recording.)
•  The available recording time becomes shorter 
if you use both of Viewfinder and LCD Monitor 
simultaneously when rotating the LCD Monitor 
forward to record yourself.
•  The batteries heat up after use or charging. The 
Camcorder being used will also heat up. This is 
normal.
•  Along with the reduction of the battery capacity, 
the display will change: 
 → 
 → 
 → 
 → 
. If the battery discharges, then 
 
(
) will flash.
Re-attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
•  The Lens Cap and Lens Cap Cord come 
preattached to the Grip Belt.
1
  Pass one end of the Lens Cap Cord 
through the attached eye on the Lens Cap. 
Then pass the Lens Cap through the loop 
made by itself and pull tight.
To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of your 
hand.
1
  Detach the end of the Grip Belt.
2
  Adjust the length of the Grip Belt to the 
size of your hand.
3
  Reattach the Grip Belt.
How to remove the  Sensor tag 
(For U.S.A. customers)
1
  Detach the end of the Grip Belt.
2
  Remove the Sensor tag. Then, replace the 
Grip Belt.