Panasonic PV-GS59 Benutzerhandbuch

Seite von 92
29
Before Using
„
 POWER SAVE
Set [   SETUP] >> [   POWER SAVE] >> 
[5 MINUTES] or [OFF].
[OFF]:
When about 5 minutes passed without any 
operation, the standby mode automatically will be 
set. In the standby mode, [   ] blinks and it takes 
time more than usual to start recording after you 
press the Recording Start/Stop Button.
[5 MINUTES]:
When about 5 minutes passed without any 
operation, the Camcorder automatically turns off 
to protect the tape or to prevent the battery from 
running down. When you use the Camcorder, turn 
it on again.
•  In the following cases, the power may not 
turn off even when set [   POWER SAVE] >> 
[5 MINUTES].
-  When connecting to the AC Jack
(When using the AC Adaptor)
-  When connecting the USB Cable or the DV 
Cable to a PC or other equipment
-  When the PC Mode (For PV-GS39/PV-GS59)
Menus Related to Playback
„
 AUDIO OUT
This switches the sound to be played back.
Set [   SETUP] >> [   AUDIO OUT] >> 
[STEREO], [L] or [R].
[STEREO]: 
Stereo sound (main sound and sub 
sound)
[L]: 
Left channel sound (main sound)
[R]: 
Right channel sound (sub sound)
Other Menus
„
 INITIAL SET
•  Set to Tape/Card Recording Mode.
Set [   SETUP] >> [   INITIAL SET] >> [YES] or 
[NO].
Set to [YES] to change menu settings back to their 
factory default condition.
•  The initializing takes a little while.
•  Language setting cannot be back to the initial 
shipping condition.
„
 DEMO MODE
•  Set to Tape Recording Mode.
If you set [   SETUP] >> [   DEMO MODE] 
>> [ON] without inserting a cassette or a 
card, the Camcorder is automatically set to 
the demonstration mode for introducing its 
functions. If any button is pressed or operated, 
the demonstration mode is canceled. If no 
operations take place for approx. 10 minutes, 
the demonstration mode automatically starts. 
To terminate the demonstration mode, insert a 
cassette or a card, or set to [   DEMO MODE] >> 
[OFF]. For normal use, set this function to [OFF].
 LP Mode
You can switch the tape recording speed.
• Set to Tape Recording/Playback Mode.
1
 Set 
[  BASIC] or [   ADVANCED] >> [   
REC SPEED] >> [LP].
If the LP mode is selected, the recording 
time will be 1.5 times the SP mode, but some 
functions will be disabled.
•  We recommend using the SP mode for important 
recordings.
•  In order to fully exhibit the performances of the LP 
mode, we recommend using Panasonic cassettes 
marked LP mode.
•  Audio dubbing is not possible with LP Mode. (p. 53)
•  In the LP mode, the picture quality will not be 
degraded in comparison with the SP mode, but 
mosaic noise may appear on the playback image or 
some functions may be disabled.
-  Playback on other digital video equipment or on 
digital video equipment without the LP mode.
-  Playback of the image on other digital video 
equipment recorded in the LP mode.
-  Slow Motion/Still Advance playback.