Panasonic PV-GS35 Benutzerhandbuch
18
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Before Using
While the Camcorder is accessing the Card (reading,
recording, playback or erasing), the Card Access
Lamp lights up.
• While the Card Access Lamp is on, never attempt
recording, playback or erasing), the Card Access
Lamp lights up.
• While the Card Access Lamp is on, never attempt
to open the Card Slot Cover, to pull out the Card,
to turn off the Camcorder, or to turn the Mode Dial.
Such actions will damage the Card, and recorded
data, and cause the Camcorder to malfunction.
to turn off the Camcorder, or to turn the Mode Dial.
Such actions will damage the Card, and recorded
data, and cause the Camcorder to malfunction.
Card Access Lamp
10
Turning on the Camcorder
Turn on the power first and then select modes.
How to Turn on the Power
1
Set the [OFF/ON] Switch
28
to [ON] while
pressing the button
1
.
• The [POWER] Lamp
32
lights up.
How to Turn off the Power
2
Set the [OFF/ON] Switch
28
to [OFF] while
pressing the button
1
.
• The [POWER] Lamp
32
goes off.
10
28
32
1
28
1
1
Open the LCD Monitor and then slide the
[
ŻOPEN] Lever
7
to open the Card Slot
Cover
8
.
2
While holding the Memory Card with its cut
corner facing right
1
, insert it into the Card
Slot
9
.
1
Inserting a Card
7
8
9
3
Close the Card Slot Cover
8
securely.
Removing the Card
Open the Card Slot Cover and press the center of
the Card and then pull it straight out.
• After removing the Card, close the Card Slot
the Card and then pull it straight out.
• After removing the Card, close the Card Slot
Cover.
• The Camcorder may be damaged if the Card is
forced out when the Card is fully inserted.
Using a Memory Card (Optional)
A Card can be used to record still pictures.
• Use a genuine SD Memory Card or MultiMediaCard
manufactured by Panasonic only.
Before inserting or removing a Card, be sure to
turn off the Camcorder.
turn off the Camcorder.
• Otherwise, the Camcorder may not function properly
or it may cause the loss of recorded data in a Card.
Accidental Erasure Prevention
• For other notes concerning this item, see page 59.
1
Opening the accidental erasure prevention slider
1
on the cassette (by sliding it to the [SAVE] arrow
direction) prevents recording. To enable recording,
close the accidental erasure prevention slider (by
sliding it to the [REC] arrow direction).
close the accidental erasure prevention slider (by
sliding it to the [REC] arrow direction).
Concerning the Card
• Do not touch the terminals on the back of the
card.
• Do not format the card with another Camcorder or
any personal computer. This operation may make
the card unusable.
the card unusable.
• Electrical noise, static electricity, or failure of the
Camcorder or the card may damage or erase the
data stored on the card. We recommend saving
important data on a personal computer by using
a USB Cable, PC Card Adaptor, or USB Reader/
Writer.
data stored on the card. We recommend saving
important data on a personal computer by using
a USB Cable, PC Card Adaptor, or USB Reader/
Writer.
SD Memory Card
• The memory capacity indicated on the SD
Memory Card label corresponds to the total
amount of capacity to protect and manage
the copyright and the capacity available as
conventional memory for a Camcorder, personal
computer or other equipment.
amount of capacity to protect and manage
the copyright and the capacity available as
conventional memory for a Camcorder, personal
computer or other equipment.
32