Panasonic GR-DX300 Benutzerhandbuch

To S/AV

S-Video/Audio/Video/Editing
cable (provided)

Connector
cover*

* When connecting the cables, open this cover.
** The audio connection is not required for watching still

images only.

*** Connect when the S-Video connection is not used.

VCR

TAPE PLAYBACK

Connections

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown

in the illustration.

If using a VCR . . . go to step 3.
If not . . . go to step 4.

Connect the VCR output to the TV input, referring to

your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the TV

to its VIDEO mode.

To choose whether or not the following displays
appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

墌

pg. 34, 36).

Or, press DISPLAY

on the remote control to

turn on/off the date indication.

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

墌

pg. 35, 36).

• Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen (

墌

pg. 34, 36).

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack (

墌

pg. 7).

● Set the video out select switch of the cable adapter as

required:
Y/C

: When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video
cable.

● To monitor the picture and sound from the camcorder

without inserting a tape or memory card, set the
camcorder’s Power Switch

to “

” or “

”, then set

your TV to the appropriate input mode.

● Make sure you adjust the TV sound volume to its

minimum level to avoid a sudden burst of sound when the
camcorder is turned on.

● If you have a TV or speakers that are not specially

shielded, do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.

● If no image is displayed or no sound is heard from the TV,

set “S/AV INPUT” to “OFF” in the Menu Screen
(

墌

pg. 35).

● While the S-Video/Audio/Video/Editing cable is connected

to the S/AV connector

, sound cannot be heard from

the speaker.

To AUDIO**, VIDEO***
and

-IN connectors

“Y/C”/“CVBS”
video out
select switch

If your VCR has the SCART
connector, use the provided
cable adapter.

Not
connected

To TV or VCR

01 DX300/100/95/75EK_EN 12-16

2/26/03, 7:12 PM