Panasonic PV-GS19 Benutzerhandbuch
35
Playback Mode
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
J A N 2 2 0 0 5
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
J A N 2 2 0 0 5
Playing Back a Tape
The recorded scene can be played back immediately
after the recording.
after the recording.
1
Set the [OFF/ON] Switch
28
to [ON].
• The [POWER] Lamp
32
lights up.
2
Set the Mode Dial
34
to Tape Playback
Mode.
• The One-Touch Navigation icon is displayed on
the lower right of the screen.
3
Move the Joystick Control [
Ż]
35
to rewind
the tape.
• Rewind the tape to the point where you want to
start playback.
• When the tape reaches the beginning, rewinding
stops automatically.
4
Move the Joystick Control [
Ÿ]
35
to start
playback.
• The [
Ź] Indication appears.
To Stop Playback
Move the Joystick Control [
ź] to select [ ].
Adjusting the Sound Volume
Finding a Scene You Want to Play
Back
Back
Cue/Review Playback
If the Joystick Control [
Ź] or [Ż]
35
is moved
during Playback, it turns to Cue Playback
A
or
Review Playback
B
.
• If the Joystick Control is held continuously, it turns to
Cue Playback or Review Playback until you release
it.
it.
• During Cue/Review playback, fast-moving images
may show noise as a mosaic.
• Before and after Cue/Review playback, the screen
may become blue for a moment or images may be
distorted.
distorted.
34
14
• For other notes concerning this item, see page 62.
A
B
• If a cassette recorded with copyright protection
signal is played back, the picture is distorted by
mosaic-like patterns.
mosaic-like patterns.
28
32
35
35
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
R 2 : 0 0
ɱ
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
J A N 2 2 0 0 5
35
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
R 2 : 0 0
ɱ
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 5
J A N 2 2 0 0 5
35
Playback Mode
35
• Set to Tape Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
On the Remote Control, press the [T] Button to
increase the volume or the [W] Button to decrease
it. (PV-GS35 only)
increase the volume or the [W] Button to decrease
it. (PV-GS35 only)
• When the adjustment is completed, the volume
indication [ ] will disappear.
• If you do not hear the sound, check the settings of
[
SETUP] >> [ 12bit AUDIO].
Adjust the speaker volume for playback.
1
Push the [–
/ VOL +] Lever
14
to adjust
the volume.
• Towards [+]: increases the volume
• Towards [–]: decreases the volume
• Towards [–]: decreases the volume
(The closer to [+], the higher the volume.)
[One-Touch Navigation icon]