Panasonic PV-GS19 Benutzerhandbuch

Others

•  If you record a still picture in Progressive 

Photoshot Mode, the brightness and hue of the 
recorded still picture may become unstable.

•  If this mode is used for indoors, the screen may 

flicker. If so, change the [ 

 SCENE MODE] 

setting to [OFF].

•  Extremely dark scenes may not be able to be 

recorded finely.

•  If the subject is extremely bright, the recorded 

image may become whitish and the periphery of 
the recorded image extremely dark.

•  If the recording subject is extremely bright, the 

recorded image may become whitish.

„ White Balance

•  When the Camcorder is turned on with the Lens 

Cap attached, the automatic White Balance 
adjustment may not function properly. Please turn 
the Camcorder on after removing the Lens Cap.

•  When setting both the White Balance and the Iris/

Gain, set the White Balance first.

•  Whenever recording conditions change, re-set the 

White Balance for correct adjustment.

•  When you set the Zoom higher than 24× 

(PV-GS19) / 26× (PV-GS31) / 30× (PV-GS35)

•  When you display a Menu
•  When you use the MagicPix Mode

When the manual adjustment mode is selected
•  Flashing indicates that the White Balance 

previously adjusted is stored. This setting is 
stored until the White Balance is adjusted again.

When white balance cannot be set in the manual 
adjustment mode
•  White balance may not be adjusted properly in the 

manual adjustment mode in dark places. If so, use 
the auto white balance mode.

During setting in the manual adjustment mode
•  When the setting is completed, it will remain lit.

„ Manual Shutter Speed Adjustment

•  If you increase the shutter speed manually, the 

sensitivity lowers and accordingly the gain value 
increases automatically, which may increase the 
noises on the screen.

•  You may see vertical lines of light in the playback 

image of a brightly shining subject or highly reflective 
subject, but this is not a malfunction.

•  During normal playback, image movement may not 

look smooth.

•  Avoid recording under fluorescent light, mercury light 

or sodium light because the color and brightness of 
the playback image may change.

•  When recording in the extremely bright place, the 

color of the screen may change or flickers. If so 
adjust the shutter speed manually to 1/60 or 1/100.

•  If you are using MagicPix Mode (p. 30) or Scene 

Mode (p. 31), you cannot adjust the shutter speed.

„ Manual Iris Adjustment

•  Depending on zoom magnification, there are iris 

values that are not displayed.

•  If the value does not become [OPEN], you cannot 

adjust the gain value.

•  If the gain value is increased, the noise on the 

screen increases.

•  If you are using MagicPix Mode (p. 30) or Scene 

Mode (p. 31), you cannot adjust the iris.

•  If you attempt to adjust the Shutter Speed after 

setting the Iris, the value set for the Iris will be 
canceled.

„ Playing Back

If you set [   ADVANCE] >> [   REPEAT PLAY] 
>> [ON], the Camcorder switches to Repeat Play 
Mode, and the [ 

Ź] Indication appears. (To cancel 

Repeat Playback Mode, set the [   REPEAT PLAY] 
to [OFF].)
•  When you set [   USB FUNCTION] >> [WEB 

CAM] and then connect the USB Cable, the 
Repeat Playback Mode is canceled.

You can select the sound by using the [   AUDIO 
OUT] setting on the [   SETUP] Sub-Menu.
STEREO: Stereo Sound (main sound and sub  

 

 sound)
L: 

Left channel sound (main sound)

R: 

Right channel sound (sub sound)

•  If you dub a tape recorded at the [12bit] selected 

as the [   AUDIO REC] on the [   SETUP] 
Sub-Menu, playback sound becomes stereo 
sound regardless of the [   AUDIO OUT] setting if 
[

 12bit AUDIO] is set to [MIX].

„ Playing Back a Card

•  While the data on a card is playing back, do not 

operate the Mode Dial.

•  If a blank (nothing recorded) Card is played, the 

screen becomes white.

•  If you attempt to play back file recorded in a different 

format or file data is defective, the whole display 
becomes bluish and the [UNPLAYABLE CARD] 
Indication may appear as a warning.

•  When the Access Lamp is lit, do not insert or remove 

a card.

•  When playing back a picture recorded on other 

equipment, its size and that of this Camcorder may 
appear differently.

•  It takes time to display the file depending on the 

number of pixels of the file.

•  When playing back a file recorded on other 

equipment, the date and time display is different 
from when it was recorded.