Panasonic HX-WA10 Benutzerhandbuch

VQT3P35

A card must be formatted with this camera:

i

After purchasing, when used for the first time, or

i

If it was formatted using a personal computer or other device.

The card cannot be formatted if the lock switch is set to the “LOCK” position. 
Proceed with the format procedure after setting the lock switch to the 
unlocked position (page 29).

i

Do not turn off the power to the camera or eject the card during formatting.

i

When a storage medium is formatted, all recorded files on the medium are 
erased. Protected data (page 99) is also erased, so before formatting a 
card, any data you want to keep should be copied to your personal 
computer’s hard disk or other storage medium.

i

If a card is reformatted or the data is erased from the card using the 
camera or a computer, the card’s control data may be merely modified and 
the data itself may not be completely erased from the card.

i

In some cases it may be possible to recover the data from a reformatted 
card using special software for that purpose. However, if the camera is 
used to erase data, it will be impossible to recover the data even by the use 
of data recovery software.

i

If you are disposing of a card, it is recommended that you physically 
destroy it. If you are transferring the card to someone else to use, it is 
recommended that you use the camera to erase the data, or use 
commercially available software for erasing card data. Managing data is 
the responsibility of the user.

i

Use the AC adaptor to power the camera. [DELETE DATA] cannot be 
selected when the battery is used to power the camera.