Panasonic DMC-TZ50 Benutzerhandbuch

Seite von 57
4   
VQT1U22
VQT1U22
   5
The battery is not charged 
when the camera is 
shipped. Charge the 
battery and set the clock 
before use.
When not using a card (sold 
separately), you can record 
or play back pictures on the 
built-in memory (P.18).
Quick start guide
-If you see this symbol-
Information on Disposal in other 
Countries outside the European 
Union
This symbol is only valid in the 
European Union. If you wish to discard 
this product, please contact your local 
authorities or dealer and ask for the 
correct method of disposal.
About the battery pack
Battery pack (Lithium ion battery pack)
•  Use the specified unit to recharge the 
battery pack.
•  Do not use the battery pack with 
equipment other than the specified 
unit.
•  Do not get dirt, sand, liquids, or other 
foreign matter on the terminals.
•  Do not touch the plug terminals (+ and 
−) with metal objects.
•  Do not disassemble, remodel, heat or 
throw into fire.
If any electrolyte should come into 
contact with your hands or clothes, wash 
it off thoroughly with water.
If any electrolyte should come into 
contact with your eyes, never rub the 
eyes. Rinse eyes thoroughly with water, 
and then consult a doctor.
About the battery charger
CAUTION!
DO NOT INSTALL OR PLACE THIS 
UNIT IN A BOOKCASE, BUILT-
IN CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE 
UNIT IS WELL VENTILATED. TO 
PREVENT RISK OF ELECTRIC 
SHOCK OR FIRE HAZARD DUE 
TO OVERHEATING, ENSURE 
THAT CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.
Battery charger
This battery charger operates on AC 
between 110 V and 240 V.
But
•  In the U.S.A. and Canada, the battery 
charger must be connected to a 120 V 
AC power supply only.
•  When connecting to an AC supply 
outside of the U.S.A. or Canada, use 
a plug adaptor to suit the AC outlet 
configuration.
1
Charge the battery
2
Insert the battery 
and the card
3
Turn on the power
4
Set REC/PLAY 
switch to 
5
Set the mode dial 
to 
6
Press the shutter button and 
take pictures
  
To play back the pictures
 
Previous
Next
1.  Set REC/PLAY 
switch to 
.
2.  Select the picture 
you want to view.