Panasonic AG-HPX371E Benutzerhandbuch

45

Chapter

Recording

and
Pla
ybac

k

Set the menu option ONE CLIP REC to OFF.

A text memo can be automatically added to the start of the 
recording, the start of a section can be cued for playback, 
and the thumbnail of the location can be checked before 
each recording.
To automatically add a text memo to the start point of the 
recording, set the menu option START TEXT MEMO to ON 
in the RECORDING SETUP screen.
Check and playback the location of the added text memo 
by selecting THUMBNAIL → TEXT MEMO CLIPS from the 
Thumbnail Menu and moving the cursor over the desired 
clip.
Refer to [Playing back a clip at the position where a text 
memo is recorded] (page 116) for details.
To cue to the location of the text memo during playback, 
set the menu option SEEK SELECT to CLIP&T in the 
OTHER FUNCTIONS screen, and press the FF or REW 
button while playback is paused.

Proxy recording is also possible in one-clip recording 
mode.
As proxy data is also compiled into combined clips, 
the data can be handled as a single clip in P2 Viewer. 
However, note the following precautions when recording 
proxy data to an SD memory card.
•  If the SD memory card is removed and replaced while 

compiling to a clip is in progress, proxy data will not 
be recorded to the new SD memory card until the 
compiling process is stopped. Check that there is 
sufficient space and confirm the number of files (up 
to 1000 clips can be recorded) before using an SD 
memory card. If you want to continue proxy recording 
after an SD memory card has been replaced, press and 
hold the STOP button for about 2 seconds to stop the 
compiling process, and start recording to a new clip.

•  If recording to an SD memory card is stopped mid-

progress, the proxy data recorded on that card will be 
incomplete and will not match the clip data recorded to 
the P2 card.

•  This mode will not function when the interval recording, 

one-shot recording, loop recording, or VFR recording 
functions are selected.

•  This mode will not function when the menu option REC 

SIGNAL is set to 1394.

•  The menu and thumbnail operations are restricted as 

follows when combining to the clip. Press and hold the 
STOP button for about 2 seconds to stop combining to 
the clip when switching to this mode.
•  The following menu items cannot be changed.
 

SYSTEM MODE, REC SIGNAL, CAMERA MODE, 
REC FORMAT, PC MODE, REC FUNCTION, 

 

25M REC CH SEL



•  The following Menu items, related to the reading/

writing of the SD memory card and reading of the 
settings file, cannot be executed.

 

LOAD/SAVE/INIT in SCENE FILE, all options in 
CARD FUNCTIONS, CAC CARD READ in LENS 
SETUP, USER FILE and MENU INIT in OTHER 
FUNCTIONS

•  The following thumbnail menu items cannot be 

selected and executed.
OPERATION→ COPY
OPERATION → DEVICE SETUP → PROXY

•  The processing time to complete the recording may 

take a little more time than normally to allow the clip to 
be combined with subsequent recordings.

•  The fade process does not work on discontinuous audio 

during playback where the recordings are combined 
within the clip.

•  If non-linear editing software is used on clips with 

multiple combined recordings, the software may not 
operate normally (as of Apr. 2010).

  For the latest information on software that has been 

confirmed to work with these types of clips, visit the 
support desk at the following website.

  http://pro-av.panasonic.net/

Installing an optional video encoder card (AJ-YAX800G) in 
P2 card slot 2 makes it possible to record MPEG4 format 
video, time code data and other real-time data to P2 cards 
or SD memory cards simultaneous with camera recording 
of video and audio.



For details, refer to the supplied User’s Guide of the video 
encoder card.