Panasonic HDC-DX1 Benutzerhandbuch
39
VQT1A15
Setup
To exit the menu screen
Press the MENU button.
≥The menu screen does not appear during
recording or playing. You cannot start other
operations while the menu screen appears.
operations while the menu screen appears.
The menu screen transition is the same as when
the buttons on the main unit are used.
the buttons on the main unit are used.
1
Press the MENU button.
2
Select a menu item.
≥Use the direction buttons (3, 4, 2, 1)
and ENTER button in place of the cursor
button on the main unit.
button on the main unit.
3
Press the MENU button to exit
the menu screen.
the menu screen.
Setting date and time
When the unit is turned on for the first time, a
message asking you to set the date and time will
appear. Move the cursor button up or down to
select [YES], press the centre of the cursor
button and then perform steps 2 and 3 below to
set the date and time.
message asking you to set the date and time will
appear. Move the cursor button up or down to
select [YES], press the centre of the cursor
button and then perform steps 2 and 3 below to
set the date and time.
¬
Rotate the mode dial to select
.
1
Press the MENU button, then
select [BASIC]
select [BASIC]
#
[CLOCK SET]
#
[YES]
and press the cursor
button.
2
Move the cursor button left or
right to select the item to be set.
Then, move the cursor button up
or down to set the desired value.
right to select the item to be set.
Then, move the cursor button up
or down to set the desired value.
≥The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
≥The 24-hour system is used to display the
time.
3
Press the cursor button to enter
the selection.
the selection.
≥The clock function starts at [00] seconds
when the cursor button is pressed.
≥After pressing the MENU button to finish
the setting, check the date and time
display.
display.
Operating with remote control
MENU
MENU
ENTER
MENU
ENTER
MENU
ENTER
VQT1A15ENG.book 39 ページ ２００７年１月２９日 月曜日 午後８時２４分