Panasonic HDC-DX1 Benutzerhandbuch

VQT1A15

(SD)

Use the built-in flash in order to record still 
pictures in dark places.

¬

Move the cursor button left to 
select [ß].

≥Each time the cursor button is pressed up, 

the indication changes by one setting in the 
following order: [FLASH ON] 

> 

[FLASH AUTO] 

> [FLASH OFF]

≥When the PHOTO SHOT button is pressed 

halfway, the flash indicator will appear in 
the bottom left corner of the screen. 
[FLASH ON]:

ß

[FLASH AUTO]: ßA

[FLASH OFF]:

≥When [FLASH AUTO] is set, the ambient 

brightness is automatically detected, and 
the flash will activate only when necessary. 
(If the flash is not necessary, the [ßA] 

indicator will not appear when the 
PHOTO SHOT button is pressed halfway.)

≥This function’s default setting is 

[FLASH AUTO].

The flash is activated and the picture will be 
recorded.

Set the flash to [FLASH OFF].

≥Do not block the flash with your hand or by 

other means.

≥The unit automatically determines if the flash is 

necessary even when it has been set to 
[FLASH OFF] by detecting the ambient 
brightness. (If it determines that the flash is 
necessary, the [

] indication lights up in red 

when the PHOTO SHOT button is pressed 
halfway.)

≥If the [

ß] indication etc. flashes or is not 

displayed when the PHOTO SHOT button is 
pressed halfway, the flash is not activated.

≥The available range of the flash is approx. 1 m 

to 2.5 m in dark places. Pictures will appear 
dark or reddish when they are recorded by 
using the flash at distances greater than 2.5 m.

≥Using the flash fixes the shutter speed of 1/750 

or faster to 1/500.

≥The picture may become out of focus in dark 

places. If so, adjust the focus manually.

≥The picture may appear dark if the flash is lit in 

front of a white background.

≥Set the flash to [FLASH OFF] where using a 

flash is prohibited.

≥If the flash will be activated a large number of 

times, it may take longer to charge it.

VQT1A15ENG.book  59 ページ  ２００７年１月２９日　月曜日　午後８時２４分