Panasonic HDC-DX1 Benutzerhandbuch
With other products
91
VQT1A15
Playback using VIERA Link (HDAVI Control)
(RAM)
(-RW)
(-R)
(-R\DL)
(SD)
If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link (HDAVI Control) with a
HDMI cable, the following linked operations become possible.
HDMI cable, the following linked operations become possible.
1
Connect this unit and a Panasonic TV (VIERA) compatible with
VIERA Link with a HDMI cable (optional).
VIERA Link with a HDMI cable (optional).
≥Use a HDMI cable (optional) A with the logo shown on above.
≥If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2
≥If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2
or HDMI3.
2
Set so that VIERA Link is activated on the connected TV.
≥Read the operating instructions of the TV for how to set etc.
3
Set the mode dial to
to turn on the power.
4
Press the MENU button, then select [SETUP]
#
[VIERA Link]
#
[ON] and
press the cursor button.
≥The default setting is [ON].
≥You can use the remote control for the TV to control playback on this unit.
≥If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
≥If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
(The power cannot be cut off when recording a motion picture, formatting a disc, finalizing a disc,
un-finalizing a disc, deleting data, recovering data or connecting the unit to a computer with a USB
cable.)
un-finalizing a disc, deleting data, recovering data or connecting the unit to a computer with a USB
cable.)
≥If you connect with a HDMI cable and then turn on the power, the input channel on the TV
automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV’s [Power on Link] setting).
automatically (if [Set] has been selected for the TV’s [Power on Link] setting).
– Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
switch input, please read the operating instructions for the TV.)
≥If VIERA Link does not work properly, refer to page 117.
HDMI IN
A
VQT1A15ENG.book 91 ページ ２００７年１月２９日 月曜日 午後８時２４分