Panasonic AG-DVC7P Benutzerhandbuch
18
B
B
B
B
e
e
e
e
ff
ff
o
o
o
o
rr
rr
e
e
e
e
U
U
U
U
s
s
s
s
e
e
e
e
Setting Date and Time
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >>
[YES].
[YES].
2
Press the [PUSH] Dial > to select [YEAR]/
[MONTH]/[DAY]/[HOUR]/[MINUTE] and turn to
set it to a desired value.
[MONTH]/[DAY]/[HOUR]/[MINUTE] and turn to
set it to a desired value.
1
Connect the AC Adaptor to the Camera
Recorder with the power turned off and then
connect to the AC Mains socket.
Recorder with the power turned off and then
connect to the AC Mains socket.
O
After charging for 4 hours, the built-in lithium
battery can power the clock for approximately 3
months.
battery can power the clock for approximately 3
months.
3
Press the [MENU] Button B to finish setting the
date and time.
date and time.
O
The clock operation starts from [00] second.
O
The Menu will disappear when the [MENU]
Button is pressed again.
Button is pressed again.
O
Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
2000, 2001, ..., 2089, 2000, ...
O
If the built-in battery is weak, the Date/Time
Indication becomes [--]. In this case, charge the
built-in battery.
Indication becomes [--]. In this case, charge the
built-in battery.
O
The clock employs the 12-hour system.
MENU
W.B/SHUTTER/IRIS
PUSH
VOL/JOG
>
B
Since the internal clock of the Camera Recorder has a
slight imprecision, make sure to check the time before
recording.
slight imprecision, make sure to check the time before
recording.
CLOCK SET
PUSH MENU TO RETURN
YEAR
2002
MONTH OCT
DAY
DAY
0
8
HOUR 10AM
MINUTE 30
MINUTE 30
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of
the clock. When the Date/Time Indication becomes [--],
the internal lithium battery is exhausted.
the clock. When the Date/Time Indication becomes [--],
the internal lithium battery is exhausted.
LP Mode
A desired recording speed can be selected with [REC
SPEED] on the [RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP Mode.
Although the image quality does not decrease with the
LP Mode recording, mosaic-pattern noise may appear
on a playback image, or some normal functions may
be restricted.
SPEED] on the [RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time
becomes 1.5 times longer than that of SP Mode.
Although the image quality does not decrease with the
LP Mode recording, mosaic-pattern noise may appear
on a playback image, or some normal functions may
be restricted.
O
The contents that are recorded in LP Mode are not
completely compatible with other equipment.
completely compatible with other equipment.
O
Audio dubbing is not possible with LP Mode. (-38-)
Audio Recording Mode
The sound quality of the recorded sound can be
selected with [AUDIO REC] on the [RECORDING
SETUP] Sub-Menu.
High sound-quality recording is possible with “16 bit
48 kHz 2 track” Mode. With the “12 bit 32 kHz 4 track”
Mode, the original sound can be recorded on 2 tracks
in stereo, while the other 2 tracks can be used for
Audio Dubbing.
selected with [AUDIO REC] on the [RECORDING
SETUP] Sub-Menu.
High sound-quality recording is possible with “16 bit
48 kHz 2 track” Mode. With the “12 bit 32 kHz 4 track”
Mode, the original sound can be recorded on 2 tracks
in stereo, while the other 2 tracks can be used for
Audio Dubbing.
--:--:--
--.--.----
--.--.----