Panasonic AG-HPX600P Benutzerhandbuch

– 130 –

ZOOM/FOCUS

Selects the unit of zoom and focus values.

 

f

When [mm/m] or [mm/feet] is selected
Displayed only when an auto-focus compatible lens is attached.

CARD/BATT

Sets the remaining capacity display for P2 card and battery.

P2CARD REMAIN

Selects the type of P2 card remaining capacity display for recording.
[ONE-CARD]

Displays the remaining capacity of the card currently being 

recorded.

Displays the total remaining capacity of two cards.

OTHER DISPLAY

Sets other information display items.
[PARTIAL]

Displays partial information.

Displays all information.

Does not display.

MENU BACK

Selects whether to make characters stand out by lowering the background 

transmittance while displaying the setting menu.
[ON]

Lowers the background transmittance.

Does not lower the background transmittance.

REC COUNTER

Sets counter operation during recording.
[TOTAL]

Continues counting by integrating until reset with the <RESET> 

button.

Clears the count value when recording starts, and counts time 

for each shooting.

         indicates factory setting values.

EXT DC IN SEL

Sets the type of external DC power.
[AC ADAPTER] AC adaptor
[BATTERY]

Battery

BATTERY SELECT

Sets the battery type.

BATTERY MODE

Sets the near end.
[AUTO]

Near end is set automatically with the battery selected with 

[BATTERY SELECT].

Sets the near end voltage manually.

HYTRON50 NEAR

Sets the near end voltage of [HYTRON50]. (Can be adjusted in 0.1 V units.)

HYTRON140 NEAR

Sets the near end voltage of [HYTRON140]. (Can be adjusted in 0.1 V units.)

DIONIC HC NEAR

Sets the near end voltage of [DIONIC HC]. (Can be adjusted in 0.1 V units.)

DIONIC90 NEAR

Sets the near end voltage of [DIONIC90]. (Can be adjusted in 0.1 V units.)

DIONIC160 NEAR

Sets the near end voltage of [DIONIC160]. (Can be adjusted in 0.1 V units.)

ENDURA7 NEAR

Sets the near end voltage of [ENDURA7]. (Can be adjusted in 0.1 V units.)

ENDURA10 NEAR

Sets the near end voltage of [ENDURA10]. (Can be adjusted in 0.1 V units.)

PAG L96e NEAR

Sets the near end voltage of [PAG L96e]. (Can be adjusted in 0.1 V units.)

TYPE A FULL

Sets the full voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)

TYPE A NEAR

Sets the near end voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)

TYPE A END

Sets the end voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)

TYPE B FULL

Sets the full voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)

TYPE B NEAR

Sets the near end voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)

TYPE B END

Sets the end voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)

         indicates factory setting values.