Panasonic AG-HPX600P Benutzerhandbuch

– 133 –

P2 BROWSE (OP3)

Sets the P2 browsing function.

 

f

If [PC MODE] is set to [ON] when OP3 is installed, 

the selected item is displayed in blue and cannot 

be set.

Activates theP2 browsing function.

[ON (+CTRL)]

Activates the P2 browsing function, and accepts recording 

control of the camera as well as settings of time code and user 

bits from the connected device.

Deactivates theP2 browsing function.

         indicates factory setting values.

USER FILE

Saves, reads, or initializes user files in the built-in memory of the camera. 

 

f

This setting does not affect the items set on the [SCENE FILE] screen.

 

f

This setting is not available in the following cases:
-  The USB device mode is set.

-  Clip connection is underway with one-clip 

recording.

 

f

User file includes the setting value of SmartUI.

ACCESS LED

Sets whether to light the access LED of the P2 card.

REC TALLY

Sets the tally lamp display on the viewfinder.

 

f

When the [HD SDI REMOTE] item is set to [ON] 

and the recording operation control signal is 

output superimposing to the HD SDI signal, the 

front tally lamp on the viewfinder and the back 

and rear tally lamps on the body are illuminated, 

regardless of the setting of this item or recording 

status of the camera.

Illuminates the red tally lamp on the viewfinder during recording 

with the camera. The front tally lamp and the back and rear tally 

lamps on the body are illuminated.

Illuminates the green tally lamp on the viewfinder during 

recording with the camera. The front tally lamp or the tally 

lamps on the body are not illuminated

During recording with the camera, the tally lamp on the 

viewfinder is not illuminated and the recording status is 

displayed only with text on the screen. The front tally lamp or 

the tally lamps on the body are not illuminated.

 

f

The screen display for recording always appears regardless of the above 

settings.

CLOCK SETTING

Sets the built-in calendar (date and time).

TIME ZONE

Sets the time lag against the Greenwich Mean Time (GMT).

[−12:00] ... [0:00] ... [+13:00]

 

f

This setting is not initialized when initialization is 

performed with the [INITIAL] item of [MENU INIT] 

and [USER FILE].

GL PHASE

Selects the output signal of which phase is to be locked to the signal input to the 

 

f

This setting is not available when the [SYSTEM 

MODE] item is set to [480-59.94i], [576-50i], and 

[1080-23.98PsF].

Locks the phase of HD SDI output signals.

Locks the phase of the down-converted composite signal.

H PHASE

Adjusts the horizontal phase when locking the phase to the signal to the signal 

input to the <GENLOCK IN> terminal.

[−512] ... [0] ... [+511]

 

f

Press and turn up or down the jog dial button, 

and keep pressing it at the position to change the 

value faster.

SEEK SELECT

Selects the position to be cued when the <FF/)> or <%/REW> button is 

pressed while playback is paused.
[CLIP]

Top of the clip

Top of the clip and text memo location

MENU INIT

Initializes all the setting menus including all scene files F1 to F6 and user files 

(including settings of SmartUI) to the factory settings.

 

f

This setting is not available in the following cases:
-  The USB device mode is set.

-  Clip connection is underway with one-clip 

recording.

         indicates factory setting values.