Panasonic AG-HPX600P Benutzerhandbuch

– 27 –

Input reference signals when setting the generator lock on the camera 
unit, or when externally locking the time code.

@

@

 tSupply Y signals of HD or or composite signals as an input 

signal. However, the sub-carrier of the composite signal on the 

camera cannot be externally locked.

 

f

Switch input/output in the menu.

 

f

Input the reference time code to this terminal when the time code is 
locked.

 

f

Connect to the time code input terminal of the external device when 
locking the time code of the external device to the time code on the 
camera. (page 70)

The time data indication on the counter display area is retained for 
the duration that this button is held down. However, the time code 
generator continues to advance. Press again reactivates the counter.
This function is used to learn the time code or counter value of a 
particular recorded scene.
When the screen other than the [HOME] screen of SmartUI is 
displayed, the function corresponding to each setting screen is 
executed.

Each press of this button displays the counter value, time code, user 
bits, and frame rate information on the viewfinder screen.
When the screen other than the [HOME] screen of SmartUI is 
displayed, the function corresponding to each setting screen is 
executed.

Reset the counter value in the time code display area to 0 (zero).
When the screen other than the [HOME] screen of SmartUI is 
displayed, the function corresponding to each setting screen is 
executed.