Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 Benutzerhandbuch

Seite von 205
Before Use
- 8 -
(Important) About the Waterproof/Dustproof and 
Anti-shock Performance of the Camera
This does not guarantee no destruction, no malfunction, or waterproofing in all 
conditions.
¢1 This means that the camera can be used underwater for specified time in specified pressure 
in accordance with the handling method established by Panasonic.
¢2 “MIL-STD 810F Method 516.5-Shock” is the test method standard of the U.S. Defense 
Department, which specifies performing drop tests from a height of 122 cm (4 feet), at 
26 orientations (8 corners, 12 ridges, 6 faces) using 5 sets of devices, and passing the 
26 orientation drops within 5 devices. (If failure occurs during the test, a new set is used to 
pass the drop orientation test within a total of 5 devices)
Panasonic’s test method is based on the above “MIL-STD 810F Method 516.5-Shock”. 
However, the drop height was changed from 122 cm (4 feet) to 200 cm (6.6 feet) dropping 
onto 3 cm (0.1 feet) thick plyboard. This drop test was passed.
(Disregarding appearance change such as loss of paint or distortion of the part where drop 
impact is applied.)
Waterproof/Dustproof Performance
This camera’s waterproof/dustproof rating complies with the “IPX8” and “IP6X” 
ratings. Provided the care and maintenance guidelines described in this 
document are strictly followed, this camera can operate underwater, to a depth 
not exceeding 12 m (40 feet) for a time not exceeding 60 minutes. (
¢1)
Anti-shock Performance
This camera also complies with “MIL-STD 810F Method 516.5-Shock”. The 
camera has cleared a drop test from a height of 2 m (6.6 feet) onto 3 cm (0.1 feet) 
thick plywood. In most cases this camera should not sustain any damage if 
dropped from a height not exceeding 2 m (6.6 feet). (
¢2)