Panasonic AG-DVX100BE Benutzerhandbuch
E-77
Setup menu list (continued)
are the factory settings.
OTHER FUNCTIONS screen (continued)
Item/
(Display
mode)
Description of settings
POWER SAVE
(camera)
(camera)
Select the power saving mode.
When you don’t perform any specified
operations for five minutes*
ON: the camera recorder turns off
When you don’t perform any specified
operations for five minutes*
ON: the camera recorder turns off
automatically
OFF: the cylinder head pauses and
goes into standby mode without
cutting the power
cutting the power
* The camera recorder does not go
into power save mode if you use the
following controls.
following controls.
• AUTO Button
• FOCUS switch
• PUSH AUTO button
• GAIN switch
• WHITE BAL switch
• IRIS button and dial
• CH1/CH2 SELECT switch
• INPUT1/2 switch
• AUDIO control
• OIS button
• SHUTTER button
• SPEED SEL button
• Zoom button and ring
• HANDLE ZOOM switch
• Opening or closing the LCD
Note
• FOCUS switch
• PUSH AUTO button
• GAIN switch
• WHITE BAL switch
• IRIS button and dial
• CH1/CH2 SELECT switch
• INPUT1/2 switch
• AUDIO control
• OIS button
• SHUTTER button
• SPEED SEL button
• Zoom button and ring
• HANDLE ZOOM switch
• Opening or closing the LCD
Note
When connecting a DV (IEEE 1394)
cable to an external device in
transfer mode, the power will not turn
off even if you have not performed
any of these functions.
cable to an external device in
transfer mode, the power will not turn
off even if you have not performed
any of these functions.
H.P MODE
(camera)
(camera)
Select headphone output.
TAPE:
TAPE:
Sound recorded on the tape is
output.
output.
LIVE:
Current input is output.
The beep sound is not output even if
you have selected ON for BEEP
SOUND. Use this when you are
shooting in the 25P mode or any
other time that sound delay becomes
noticeable.
The beep sound is not output even if
you have selected ON for BEEP
SOUND. Use this when you are
shooting in the 25P mode or any
other time that sound delay becomes
noticeable.
USER FILE
(camera)
(VCR)
(camera)
(VCR)
LOAD:
The previous scene file settings are
loaded.
loaded.
SAVE:
The changed user file settings are
saved.
saved.
INITIAL:
The user file settings are returned to
the factory settings.
the factory settings.
• After LOAD or INITIAL, switch
camera-recorder OFF and then back
ON to ensure that the settings take
effect.
ON to ensure that the settings take
effect.
FILE TRANS
(camera)
(camera)
Make settings for scene file transfer.
(Page 46)
SCENE:
(Page 46)
SCENE:
Transfer the scene file currently
selected with the SCENE dial.
selected with the SCENE dial.
SCENE ALL:
Transfer all scene files.
USER:
Transfer all user scene files.
Note
When in FILE TRANS mode, only
the menu operation buttons will
function.
the menu operation buttons will
function.
FILE RECEIVE
(VCR)
(VCR)
RECEIVE MODE appears on the
screen after you set this mode.
screen after you set this mode.
When in FILE RECEIVE mode, only
the menu operation buttons will
function.
the menu operation buttons will
function.
HOUR METER
(camera)
(VCR)
(camera)
(VCR)
Displays the total running time (a 5-
digit figure in 1-hour increments) of the
cylinder head.
digit figure in 1-hour increments) of the
cylinder head.
Item/
(Display
mode)
Description of settings
AG-DVX100B_EN.book 77 ページ ２００５年１０月５日 水曜日 午前１０時５２分