Panasonic HDC-SD60 Benutzerhandbuch

Seite von 44
2
VQT2M64 (ENG)
Information for Your Safety
∫ EMC Electric and magnetic 
compatibility
This symbol (CE) is located on the rating 
plate.
Use only the recommended accessories.
≥ Do not use any other AV multi cables and 
USB cables except the supplied one.
≥ When you use the cable which are sold 
separately, please make sure to use the 
one whose length is less than 3 metres.
≥ Keep the Memory Card out of reach of 
children to prevent swallowing.
WARNING:
TO REDUCE THE RISK OF FIRE, 
ELECTRIC SHOCK OR PRODUCT 
DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS 
TO RAIN, MOISTURE, DRIPPING OR 
SPLASHING AND THAT NO 
OBJECTS FILLED WITH LIQUIDS, 
SUCH AS VASES, SHALL BE 
PLACED ON THE APPARATUS.
≥ USE ONLY THE RECOMMENDED 
ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR 
BACK); THERE ARE NO USER 
SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
CAUTION!
≥ DO NOT INSTALL OR PLACE THIS 
UNIT IN A BOOKCASE, BUILT-IN 
CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE 
UNIT IS WELL VENTILATED. TO 
PREVENT RISK OF ELECTRIC 
SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT 
CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT 
THE VENTILATION VENTS.
≥ DO NOT OBSTRUCT THE UNIT’S 
VENTILATION OPENINGS WITH 
NEWSPAPERS, TABLECLOTHS, 
CURTAINS, AND SIMILAR ITEMS.
≥ DO NOT PLACE SOURCES OF 
NAKED FLAMES, SUCH AS 
LIGHTED CANDLES, ON THE UNIT.
≥ DISPOSE OF BATTERIES IN AN 
ENVIRONMENTALLY FRIENDLY 
MANNER.
The socket outlet shall be installed near the 
equipment and easily accessible.
The mains plug of the power supply cord 
shall remain readily operable.
To completely disconnect this apparatus 
from the AC Mains, disconnect the power 
supply cord plug from AC receptacle.
Warning
Risk of fire, explosion and burns. Do not 
disassemble, heat above 60 oC or 
incinerate.
CAUTION
Danger of explosion if battery is 
incorrectly replaced. Replace only with 
the same or equivalent type 
recommended by the manufacturer. 
Dispose of used batteries according to 
the manufacturer’s instructions.
Product Identification Marking is 
located on the bottom of units.
HDCSD60&TM60&HS60EP-VQT2M64_mst.book  2 ページ  2010年1月15日 金曜日 午前9時42分