Panasonic AG-HMC40P Benutzerhandbuch

57

You can perform any of the following operations. 
If necessary, make preparations prior to 
undertaking the operations.

Insert the SD Memory Card on which the 
metadata is recorded into the unit. (For details 
on contents of the metadata, see the previous 
page.)

The CAMERA lamp lights red.

Menu operation (Page 95)

   Read metadata set to the SD Memory Card 

with the camera.

Up to 8 metadata files stored on the SD 
Memory Card (MTDT00 to MTDT07) 
are displayed in a list. Files with no 
corresponding data are displayed in gray.

When you touch the file you want to read, 
a confirmation message appears. Touch 
YES to read the metadata.

•

•

   Select this to set whether to record the 

metadata to be loaded into the unit 
simultaneously on the SD Memory Card. Touch 
ON to set metadata recording. 
The 

 icon appears on the LCD monitor. 

The factory setting for this mode is OFF.

   The USER CLIP NAME recording method 

is selectable. For details, see “Selecting the 
USER CLIP NAME recording method”.

   Select this to display metadata that has been 

loaded to the unit.

   Reset the COUNT value to 1.
   Touch YES to reset.

   Select this to initialize the metadata which 

has been recorded in the unit.  
Touch YES to initialize.

You can select the recording method for USER 
CLIP NAME by touching the USER CLIP NAME  
item in the setting menu RECORD SETUP screen. 
The TYPE1 and TYPE options are available for 
selection.

TYPE1

TYPE

If clip metadata has 

been read in

Uploaded 

data

Uploaded data 

+ COUNT 

value∗

If no clip metadata 

has been read in 

or if the setting 

for recording clip 

metadata has been 

turned off

Sequential 5-

digit number, 

in order of 

recording

Sequential 5-

digit number, 

in order of 

recording

(Continued on the next page)