Panasonic AG-DVC60 E Benutzerhandbuch

The underlining indicates the factory setting.

Use this to select the function to be allocated 
to the focus ring.
ZOOM:

Zooming can be performed using the 
focus ring when the camera-recorder is 
operated in the auto focus mode.

Iris adjustments can be performed using 
the focus ring when the camera-recorder 
is operated in the auto focus mode and 
the iris is to be adjusted manually.

The focus ring is used to perform manual 
focus adjustments only.

Use this to set how the iris is to be controlled 
by the direction in which the multi dial is 
rotated when the iris is to be adjusted manu-
ally.
DOWN OPEN:

The iris opens when the multi dial is 
turned downward.

The iris opens when the multi dial is 
turned upward.

Use this to set the speed of the motordriven 
lens zoom. 

NORM : Standard
HIGH

: High speed

: Low speed

To select the HANDLE ZOOM switch. 

Use this to set whether the recording opera-
tion is to be performed using the START/
STOP button on the lens.
OFF:

Recording is permitted.

Recording is inhibited so as to prevent 
operation from being conducted by mis-
take.

Use this to select the high-sensitivity shooting 
mode. 

(P32)

To select whether to record the SNS mode.
OFF:

The mode is not recorded.

The mode is recorded.

Use this to select the magnification level for 
the digital zoom. 

(P31)

Use this to select the recording duration 
mode.
SP : SP (standard recording) mode.
LP : LP (long recording) mode.

Use this to select the digital audio recording 
system.
32K (12bit):

The sound is recorded using the 12-bit/32 
kHz (4 channels) recording system.
Select this mode when leaving the sound 
heard during shooting intact even when 
audio dubbing is performed on an existing 
recording.

The sound is recorded using the 16-bit/48 
kHz (2 channels with a good sound qual-
ity) recording system.
The sound heard during shooting will be 
erased when dubbing over an existing 
recoding.

Select ON to reduce the noise generated by 
the wind blowing into the microphone in 
windy conditions. Effective with FRONT and 
REAR (LINE/MIC) input.
OFF, ON

Use this to set the ID (5 characters) informa-
tion. The ID information set is displayed when 
the color bar mode is established.

• Characters which can be set:

 (space), A to Z, 0 to 9, ., /, :

Set this to REC to record the date and time 
that were selected using the DATE/TIME set-
ting item 

(P71) on the DISPLAY SETUP 

screen as an image on the tape.
NO-REC, REC

Use this to select the time code to be 
recorded when recording the signals of the 
unit connected to the DV connector.
OFF:

The time code that was selected using the 
TCG setting item and FIRST REC TC set-
ting item is used for the recording.

The time code of the signals which are 
input to the DV connector are used for the 
recording.

• When ON has been selected for this item, 

the time code of the signals concerned 
takes precedence over the TCG item and 
FIRST REC TC item settings.

• If no signals are input to the DV connector, 

the TCG item and FIRST REC TC item 
settings are used.

AG-DVC60E_En.fm  69 ページ  ２００４年９月２日　木曜日　午後１時４３分