Panasonic AG-HPX170P Benutzerhandbuch
Adding shot marks to clips
Adding shot marks (
M
) will make it easier to find
the clips you are looking for.
1
Push the Operation lever in the w or q
direction to move the yellow frame to the
clip to which you will add a shot mark.
clip to which you will add a shot mark.
Press the USER button to which the shot
mark function has been allocated. (Page )
To release a shot mark, repeat the above steps.
When the video data of a single shot is recorded
in multiple P2 cards, you cannot set or release
shot marks unless all the P2 cards that make up
the video data are inserted into slots.
in multiple P2 cards, you cannot set or release
shot marks unless all the P2 cards that make up
the video data are inserted into slots.
Clearing the thumbnail screen
Before performing setting menu operations
(Page 94), you must clear the thumbnail screen.
Release this in the same way when the camera-
recorder is to be controlled from a nonlinear editor.
(Page 94), you must clear the thumbnail screen.
Release this in the same way when the camera-
recorder is to be controlled from a nonlinear editor.
1
Press the THUMBNAIL button.
THUMBNAIL
The normal playback standby screen (1394 input
mode) appears.
mode) appears.
Direct shooting functions
If you press the START/STOP button (red) in MCR
mode, CAM mode will be automatically activated,
and shooting will start.
mode, CAM mode will be automatically activated,
and shooting will start.
•