Panasonic AG-HMC70P Benutzerhandbuch

ª About the remaining battery 

The remaining battery capacity is displayed in 
minutes when using the Panasonic battery that 
you can use for this unit. It may take time to 
display the remaining battery capacity.

≥The display changes as the battery capacity 

reduces. 

#

#

#

#

.

If there is less than 3 minutes remaining, then 

 will become red. If the battery 

discharges, then (

) will flash.

≥The remaining battery capacity may not be 

displayed correctly where the temperature is 
low or high or if the battery was not used for a 
long period of time.
To correctly display the remaining battery 
capacity, recharge the battery, discharge it and 
then charge it again. (Even if this operation is 
performed, it may not be possible to display the 
remaining battery capacity correctly if the 
battery was used for a long period of time 
where the temperature is low or high or if the 
battery was repeatedly charged.)

≥The times of remaining battery capacity 

indication will vary depending on the status of 
use. These times are approximations.

≥When turning the mode dial to switch modes, 

the time indication will turn off in order to 
recalculate the remaining battery capacity time.

≥When using batteries made by other 

companies, the remaining battery capacity will 
not be shown. 

≥Even if the battery is inserted in this unit, it 

≥Do not use the AC cable with any other 

equipment as it is designed only for this 
unit. Do not use the AC cable from other 
equipment with this unit.

≥Put the battery on the AC adaptor to charge it. 

≥While the DC cable is connected to the AC 

adaptor, the battery will not charge.

30min

VQT1Q93_ENG_PP.book  32 ページ  ２００８年３月６日　木曜日　午後５時４２分