Panasonic AG-HMC70P Benutzerhandbuch

Seite von 124
42
Setup
24 hours and the battery will save the date and 
time for approx. 6 months. (The battery is still 
being recharged even if the mode dial is set to 
OFF.)
Adjusting LCD monitor/finder
1
Press the MENU button, then 
select [SETUP] 
#
 [LCD SET] or 
[EVF SET]
#
 [YES]
 
and press the 
center of the cursor button.
2
Select the item to be adjusted by 
pushing the right or left button of 
the cursor button, and then press 
the center of the cursor button to 
make the selection. Make any 
further adjustments by pushing 
the up or down button.
The bar display moves.
≥After adjustments are made if no operations 
are performed for about 2 seconds, the bar will 
disappear.
≥Press the MENU button to exit the menu 
screen.
[LCD SET] items:
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
[EVF SET] items:
[BRIGHTNESS]: Brightness of the finder
≥To adjust the brightness on the finder, close the 
LCD monitor.
≥If the LCD monitor is open, the settings for 
“LCD Adjustment” are reflected in the finder as 
well.
≥These settings will not affect the images 
actually recorded.
ª In order to increase the 
brightness of the entire LCD 
monitor
Press the POWER LCD button.
The [
] indication appears on the LCD 
monitor.
≥Press the POWER LCD button if the 
surroundings are bright and the LCD monitor is 
difficult to see. The entire LCD monitor will 
become approx. twice as bright as usual.
≥When the POWER LCD button is pressed 
again, the [
] indication disappears and the 
original brightness is restored.
≥This will not affect the images to be recorded.
≥If you turn on the unit when the AC adaptor is 
used, this function will automatically be 
activated.
≥This function cannot be used in PC Connection 
mode.
Adjusting the brightness and the 
color level of the LCD monitor/
finder
POWER 
LCD 
VQT1Q93_ENG_PP.book  42 ページ  2008年3月6日 木曜日 午後5時42分