Panasonic AG-HMC70P Benutzerhandbuch

Seite von 124
86
With other products
With a printer (PictBridge)
To print pictures by directly connecting this unit 
to the printer, use a printer compatible with 
PictBridge. (Read the operating instructions for 
the printer.) 
≥Use the AC adaptor to free you from worrying 
about the battery running down.
¬
Insert an SD card with recorded 
images in this unit and then set the 
mode dial to 
 to turn on the power.
1
Connect this unit and a printer.
A USB cable (optional)
≥Insert the plugs as far as they will go.
The [PictBridge] indication appears on this unit’s 
screen.
≥If the [PictBridge] indication does not appear or 
continues to flash, disconnect and then 
reconnect the USB cable or check the printer, 
SD card and settings on this unit.
2
Select a file to be printed, then 
press the center of the cursor 
button.
The number of pictures set is displayed.
3
Move the cursor button up or 
down to select the desired 
number of prints, then press the 
center of the cursor button.
≥You can set up to 9 prints.
≥To cancel the setting, set the number of 
prints to [0].
≥Up to 8 files displayed can be set in 
succession by repeating steps 2 and 3.
4
Press the MENU button to 
display the PictBridge menus.
5
Select the date print setting on 
[DATE PRINT].
≥If the printer is not capable of date printing, 
this setting is unavailable.
6
Select the paper size setting on 
[PAPER SIZE].
[STANDARD]Size specific to the printer
[4k5 INCH]:
L size
[5k7 INCH]:
2L size
[4k6 INCH]:
Postcard size
[A4]:
A4 size
≥You cannot set paper sizes not supported on 
the printer.
USB 
2.0 

VQT1Q93_ENG_PP.book  86 ページ  2008年3月6日 木曜日 午後5時42分