Panasonic AG-HMC70P Benutzerhandbuch

After the software applications are installed, this 
unit must be connected to the computer and be 
correctly recognized by the computer.
≥Connect after installing the software 

applications.

≥Remove the supplied CD-ROM (“HD Writer 2.5E 

for HDC”)

if it is inserted in the computer.

≥If the recognition procedure is not 

accomplished properly, operation will not be 
possible after connecting the unit to the 
computer.

≥If the unit fails to operate normally, it may mean 

that you have not conducted the installation or 
recognition procedure properly.

≥If you do not install the battery or connect 

the AC adaptor, operation will not be 
possible after connecting this unit to the 
computer.

A USB cable (optional)
This unit is automatically recognized by the 
computer.
≥Insert the plugs as far as they will go. The unit 

and computer will not operate properly if the 
plugs are not inserted fully.

≥When the unit is connected to a computer, 

the operation mode cannot be changed and 
its power cannot be turned off.
In this case, disconnect the USB cable (l 98).

≥When a computer is accessing the SD card in 

this unit, the card access lamp lights. (When a 
card is being accessed, 

appears on the 

LCD monitor.) Do not remove the USB cable, 
the AC adapter, or the battery while the 
computer is accessing the SD card. Doing so 
may cause gaps in the recording.

≥It may be necessary to reboot the computer 

USB 
2.0 



VQT1Q93_ENG_PP.book  96 ページ  ２００８年３月６日　木曜日　午後５時４２分