Panasonic AG-HPX250EN Benutzerhandbuch

P2 card access lamps

■

CAMERA/PB/PC (USB HOST) mode

Lights green:

Data can be saved onto the cards or loaded from
them.

Blinks green (slow):

No available space on card, card is
writeprotected.

Lights orange:

Slot that is the object of recording.

Blinks orange:

Data is now being accessed.

Blinks orange (fast):

A card is now being recognized.

Both lamps blink orange:

Ejection of card during access.

Off:

Cards have not been inserted or formatted.
Insertion of incompatible card.

■

PC (USB DEVICE) mode

Blinks orange:

Data is now being accessed.

Off:

A status other than access underway.

P2 card access lamp

Protecting against a possible erasure

Switch the write-protect switch of the P2 card to
[PROTECT].

PROTECT

Write-protect switch

Checking photos taken (REC CHECK)

Pressing the REC CHECK button after a recording
will automatically play back the last two seconds of
the most recent clip.
Holding down the REC CHECK button will allow
you to play back up to 10 seconds.
Use this function to check that recording is
performed normally.
• The camera-recorder returns to recording

standby mode after playback.

• For clips with a playback time of 10 seconds or

less, clips earlier than the current clip are not
played back even if the REC CHECK button is
held down after returning the clip to the start.

REC CHECK

button

•

Note that a backup recording performed on

a backup device connected to the DVCPRO/

DV or SDI OUT connector will also record

video played back using the REC CHECK

function.

•

In one-clip recording mode, the beginning

of a clip is not used as the start position for

playback after returning as far as possible

with the REC CHECK function or starting

playback while recording is paused.

Instead, playback starts from the start point

of the most recent recording operation.

Basic shooting operations (continued)