Panasonic AG-HPX250EN Benutzerhandbuch

Panasonic

139

Menu

SW MODE screen (continued)

Item

Setting

Notes

USER MAIN

Sets the function assigned to the USER MAIN button.

SPOTLIGHT, BACKLIGHT, ATW, ATWLOCK, S.GAIN,

D.ZOOM, Y GET, DRS, TEXT MEMO, SLOT SEL,

SHOT MARK, MAG A. LVL, LVL METER, PRE REC,

WFM, LAST CLIP, FBC, LCD B.L

“Using the USER buttons” (Page 39)

USER1

Sets a function assigned to the USER1 button.

The functions that can be assigned to this button are the

same as for the USER MAIN button.
BACKLIGHT (factory default setting)

“Using the USER buttons” (Page 39)

USER2

Sets a function assigned to the USER2 button.

The functions that can be assigned to this button are the

same as for the USER MAIN button.
TEXT MEMO (factory default setting)

“Using the USER buttons” (Page 39)

USER3

Sets a function assigned to the USER3 button.

The functions that can be assigned to this button are the

same as for the USER MAIN button.
DRS (factory default setting)

“Using the USER buttons” (Page 39)

USER4

Sets a function assigned to the USER4 button.

The functions that can be assigned to this button are the

same as for the USER MAIN button.
SLOT SEL

“Using the USER buttons” (Page 39)

MF ASSIST

Automatically sets the last focus during manual focusing.
ON:

Automatically sets the last focus.

• The focus may not be set correctly if the last focus

differs considerably from the manually set focus.

• You cannot operate using the remote control connected

to the CAM REMOTE jack.

OFF:

The focus is not adjusted automatically.

WFM

Selects the waveform displayed in the LCD monitor when

the user button to which WFM has been assigned is

pressed.
WAVE:

Displays a waveform.
VECTOR:

Vectorscope display
WAVE/VECT:

Each press of the button, switches the settings in the

following order:

OFF → WAVE (waveform) → VECTOR → OFF

___indicates the factory setting.