Panasonic AG-HPX250EN Benutzerhandbuch

142

Sets the initial time code.

•  Set the frame value to 0 or multiples of 5 when shooting/

recording is set to 24P, 24PA, or 24PN.

If any other value, the recorded time code will mis-

match.

Sets the data recorded in the camera-recorder user bits.

“Setting user bits” (Page 62)

Sets the user information. Select USER in UB MODE.

Sets one-clip recording mode.

“One-clip recording (ONE CLIP REC)” (Page 47)

•  Not available in the following

conditions.

· When REC FUNCTION is

set to something other than

NORMAL.

· When REC SIGNAL is set to

1394.

· When VFR is set to ON.

Sets whether to automatically add a text memo at the

recording start position each time you start recording.

•  Not available when REC

FUNCTION is set to something

other than NORMAL.

•  The text memo that is added

when this is set to ON indicates

the recording start position.

For details on recording the text

memo as text information, refer

to “Setting of clip meta data”

(Page 87).

Determines whether or not date and time information will

be superimposed on the image.
ON:

Superimposes date and time information on the image.
OFF:

Does not superimpose date and time information on the

image.
<Note>

When DATE/TIME on the DISPLAY SETUP screen

is set to OFF, the date and time information is not

superimposed.

___indicates the factory setting.