Panasonic AG-HPX250EN Benutzerhandbuch

Standard VFR recording

(pulldown recording)

In 1080i or 720P mode, set REC FORMAT on

the setting menu SYSTEM SETUP screen to

AVC-I 100/60i (60P) (or 50i, 50P).

In the SCENE FILE screen, set the menu

option VFR to ON and the menu option

FRAME RATE to suit shooting purposes.

You can also change the frame rate using

the SHTR/F.RATE dial.

• “Setting FRAME RATE mode” (Page 51)

Press the START/STOP button.

This starts recording in the VFR mode
(pulldown recording).

This mode can be combined with the AVC-I
100/60P (50P), AVC-I 50/60P (50P) 30PN, and
DVCPROHD/60P (50P) recording formats in 720P
system mode, and AVC-I 100/60i (50i), AVC-I 50/60i

(50i), DVCPROHD/60i (50i) in 1080i system mode.
• “Setting FRAME RATE mode” (Page 51)
• “SYSTEM SETUP screen” (Page 135)

Recording with Variable Frame Rate (VFR) (continued)

•

With AVC-Intra or DVCPRO HD in 1080i,

clips are recorded as 60i, 60P (50i, 50P)

with pull down information not recorded.

•

Audio playback is disabled when a frame

rate converter is used to extract active

frames for over and under-cranking.

Note the following about standard VFR

recording.

•

Pre-recording, loop recording, interval

recording, one-shot recording, and one-clip

recording are not available.

•

1394 output is available during recording

and recording standby, but not in AVC Intra

mode.

•

Changing Scene Dial position during

recording does not change VFR on and off

position.

•

Sound is recorded.

•

The screen may be distorted when

changing the FRAME RATE setting.

•

Gain is fixed to 0 dB when set to 4 frames

or less.

Furthermore, AGC, auto iris and ATW do not

function and must be operated manually.

•

Red, blue, or green points may appear on

the screen when the frame rate is low. This

is not a fault.