Panasonic AG-HPX250EN Benutzerhandbuch

* The COUNT value is indicated as a four-digit

number.
The COUNT value is incremented each time a
new clip is captured if clip metadata has been
read in and TYPE2 has been selected as the
recording method.
The COUNT value can be reset using the
following procedure.
Select META DATA → PROPERTY from the
thumbnail menu, then select USER CLIP NAME
to display the menu shown below.
Select COUNT RESET with the Operation lever
and press the SET button on the Operation lever
to reset the COUNT value to 1.

When a P2 card with a memory capacity of 8

GB or more is used in camera-recorder and a

one-time continuous recording exceeds the

prescribed duration (DVCPRO HD and the

AVC-Intra 100: about 5 minutes; DVCPRO50

and the AVC-Intra 50: about 10 minutes;

DVCPRO or for DV: about 20 minutes) or

when a one-time recording extends over

more than one P2 card, the recording

concerned will automatically be undertaken

as a separate clip. At this time, each clip will

be provided with its own COUNT value.

Thumbnail operations (continued)

To set whether or not the uploaded

metadata is recorded

Set ON/OFF in META DATA → RECORD from the
thumbnail menu. The factory setting is OFF.

Selecting the USER CLIP NAME

recording method

Select META DATA → USER CLIP NAME from the
thumbnail menu to select the recording method.
Two options are available: TYPE1 and TYPE2.

• TYPE1 (Factory setting)

USER CLIP NAME to be

recorded

If clip metadata has

been read in

Uploaded data

If no clip metadata has

been read in or if the

setting for recording

clip metadata has

been turned off

Same as GLOBAL CLIP

ID (UMID data)

• TYPE2