Panasonic AG-HPG10P Benutzerhandbuch

The   mark is displayed when a P2 card is 
write-protected.

With the remaining memory display, the P2 
card’s remaining memory is indicated using 
a meter and as a percentage. With the used 
memory display, the P2 card’s used memory is 
indicated using a meter and as a percentage.
Depending on the status of the card, one of the 
following messages may be displayed.

An unformatted P2 card has 
been inserted.

A card which is not supported 
by the unit has been inserted.

A P2 card has not been 
inserted.

memory) and total memory
The remaining memory (or used memory) and 
total memory of the P2 card are converted 
into minutes and displayed. Fractions of a 
minute are discarded so that the total of the 
remaining memory (or used memory) on each 
P2 card may not exactly correspond to the total 
memory.

total
A figure representing the total for the remaining 
memory (or used memory) of the cards in the 
two P2 card slots is displayed.

•  The free memory of a write-protected P2 card 

is not included in the total free memory.

 

When the cursor is moved to the slot whose 
P2 card status is displayed and [STILL] is 
pressed, the model number of the P2 card and 
other detailed information on the card will be 
displayed. When [STILL] is pressed again, the 
detailed information is cleared.

The card statuses are displayed as follows.

BRAND

MODEL NO.

SERIAL NO.

USED ID

:  Panasonic

:  AJ-P2C004HG

:  AEC06H0371

: 

OK