Panasonic AG-AC130P Benutzerhandbuch
40
Using shooting settings (scene files)
Settings according to a variety of shooting
conditions are stored in the positions on the
<SCENE FILE> dial (<F1> to <F6>).
When shooting, you can use the <SCENE FILE>
dial to immediately read out required files.
conditions are stored in the positions on the
<SCENE FILE> dial (<F1> to <F6>).
When shooting, you can use the <SCENE FILE>
dial to immediately read out required files.
•
The following files are stored as factory
settings.
settings.
<F1>: [SCENE]
File suitable for normal shooting.
<F2>: [SCENE FLUO.]
File suitable for shooting under fluorescent
lights (indoor shooting).
lights (indoor shooting).
<F3>: [SCENE SPARK]
File suitable for shooting with fuller variations
of resolution, coloring, and contrast.
of resolution, coloring, and contrast.
<F4>: [SCENE B-STR]
File suitable for broadening the contrast of
dark areas (such as shooting sunsets).
dark areas (such as shooting sunsets).
<F5>: [SCENE CINE V]
File suitable for shooting movie-like scenes
where contrast is emphasized. (Even when
the scene file is changed, the recording
format is unchanged. It must be set with the
[REC FORMAT] item on the [RECORDING
SETUP] screen. See page 85.)
where contrast is emphasized. (Even when
the scene file is changed, the recording
format is unchanged. It must be set with the
[REC FORMAT] item on the [RECORDING
SETUP] screen. See page 85.)
<F6>: [SCENE CINE D]
File suitable for shooting movie-like scenes
where dynamic range is emphasized. (Even
when the scene file is changed, the recording
format is unchanged. It must be set with the
[REC FORMAT] item on the [RECORDING
SETUP] screen. See page 85.)
where dynamic range is emphasized. (Even
when the scene file is changed, the recording
format is unchanged. It must be set with the
[REC FORMAT] item on the [RECORDING
SETUP] screen. See page 85.)
Changing scene file settings
The setting value of a scene file can be changed.
Also, changed scene files can be stored at each
position of the <SCENE FILE> dial (<F1> to <F6>).
Also, changed scene files can be stored at each
position of the <SCENE FILE> dial (<F1> to <F6>).
Example: Change the name of the scene file
1
Turn the POWER/MODE switch of the
camera <ON>. (Page 27 of Vol.1)
2
Turn the <SCENE FILE> dial to select a
scene file to change.
3
Select the setup menu [SCENE FILE] screen.
•
Menu operation (Page 28 of Vol.1)
•
Operations can be performed with buttons on
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 21 of Vol.1).
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 21 of Vol.1).
4
Tilt the OPERATION lever in the < >< >
directions to select the [NAME EDIT] item.
5
Push the OPERATION lever (or tilt in the
< > direction) and tilt in the < > direction
to select [YES], then push the OPERATION
lever again.